General

 

18 tonnes three-sided tipper with steel side panels.

Technical data

Load capacity

Permissible total weight: 18,000kg
Empty weight: approx. 4,220kg (in the basic version)
Payload: approx. 13,780kg
Load volume: approx. 17.5m³

Dimensions

Internal cargo area dimensions: approx. 5,160mm L x 2,420mm W x 800 + 600mm H
Basic version

The basic version of the HKD 290 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to your wish list Add to your wish list

Tyres 4 x 385/65R22.5 factory refurbished
Axles ADR tapered roller bearing axles, 11.3 tonnes axle load (105 km/h), 2,050 mm track width without ABS up to 60 km/h, wheel brake 406 x 120 mm, 130 mm square axle
Springs 18 tonne 2 layer parabolic spring suspension, 100 mm wide, approved for up to 105 km/h overload protection for the rear parabolic spring suspension
Steering Turntable steering with ball steering rim and type-tested Y-drawbar 1900 mm long, height adjustable as well as drawbar relief
Chassis frame welded steel construction; double T main load bearer
Brake system dual line service brake system with automatic load-dependent brake force control (ALB), 4 x diaphragm brake cylinder, spindle parking brake for the rear axle
Tipping system 3-way tipper; hydraulic multi-piston press with cardanic suspension, 1 line system, ball tipper bearings with retainer at the rear, 2 unmistakable locking pins, hydraulic stroke limiter, safety rope, 3/2-directional valve
Tipper frame profile steel in welded construction, 3 mm high-tensile steel floor
Bulkhead fixed made of steel, fixed corner stanchions
Side panels made of steel with divided central bottom unlocking and robust rubber seals that can be replaced, connecting hinges for the upper and lower side panels, fixed middle stanchions
Tailgate basic design is the same as the side panels, 1 grain hatch in the middle with lever operation, fixed corner stanchions, central bottom unlocking, bottom unlocking lever with top dead point tensioner
Raised side panel raised steel side panel 600 mm all around
Electrics 12 Volt system according to the guidelines of the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, 3 unit lamps
Accessories stable underride protection, wheel chock with bracket, rear plastic mudguard, park sockets for all connections on the drawbar, resting point supports for tipping bridge to reduce noise during driving operation
Paintwork vehicle blasted with steel grit and also degreased, chip-resistant primer, top coat in quality gloss paint. Superstructure: Kröger green; Chassis: Kröger red
Additional equipment

To prepare the HKD 290 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

  SUPERSTRUCTURE
Add to your wish list A 100S Side panel height 1600 mm instead of 1400 mm (partitioning 800 + 800 mm)
Add to your wish list A 130S Floor plate 4 mm instead of 3 mm
Add to your wish list A 300S Side tipping bridge extension 200 mm high, can be mounted on both sides
Add to your wish list A 315S Side bottom unlocking hooks, with threaded bushings on both sides
Add to your wish list A 600S Plug-in triangle at the front and rear (300 mm) with foldable roof arch
Add to your wish list A 650S Catwalk with accident protection bar on the front wall (according to the German accident prevention regulations - UVV)
Add to your wish list A 700S Yellow tarpaulin with aluminium roller board, hand crank and removable stop supports on the side
  CHASSIS
Add to your wish list F 100S Automatic trailer coupling including light, pneumatic and hydraulic connections for a 2nd trailer
Add to your wish list F 160S Underride protection made from round pipe with lighting equipment relocated upwards
Add to your wish list F 180S Plastic mudguards for the front axle
Add to your wish list F 308S Drawbar 18 tonnes 2100 mm long instead of 1900 mm Y-drawbar (necessary behind a tandem trailer)
Add to your wish list F 510S Side marking lights (LED)
Add to your wish list F 514S Contour marking film, yellow on the side and rear of the vehicle (mandatory for approval > 60 km/h)
Add to your wish list F 530S Actuation of the 2nd trailer tipping mechanism with separate hydraulic connection and gate valve
Add to your wish list F 540S Separate oil stub line to the rear (diameter 15 mm)
  WHEELS
Add to your wish list R 2000 Tyres, "new" 385/65R22.5 (105 km/h) manufacturer Continental Hybrid HT3 (EU Tire Label B,B,73)
Add to your wish list R 2100 Tyres, factory refurbished 425/65R22.5 (80 km/h) (platform height approx. + 50 mm)
Add to your wish list R 2200 Tyres, "new" 425/65R22.5 (105 km/h) manufacturer Continental (platform height approx. + 50 mm)
Add to your wish list R 2400 Tyres, "new" 445/65R22.5 (105 km/h) manufacturer Continental (platform height approx. + 50 mm)
Add to your wish list R 2460 Tyres, "new" 560/60R22.5 BKT FLOTATION RADIAL, profiles FL 693 M, (70 km/h), (tyre load at 1.5 bar 10 km/h = 4,010 kg) (platform height approx. + 220 mm), rims with imprint depth ID + 30 mm
Add to your wish list R 2500 Tyres, "new" 550/60-22.5 16PR (40 km/h) profile 328 (platform height approx. + 220 mm)
Add to your wish list R 2580 Tyres "new" 560/60R22.5 NOKIAN Country King 161D (tyre load at 1.5 bar 10 km/h = 5,000 kg) (platform height approx. + 220 mm)
Add to your wish list R 2600 Tyres, "new" 560/60R22.5 BKT FLOTATION RADIAL, profile FL 630, (65 km/h), (tyre load at 1.5 bar 10 km/h = 4,700 kg) (platform height approx. + 220 mm), rims with imprint depth + 30 mm
  PAINTWORK
Add to your wish list L 100S Special paintwork, chassis according to RAL tone
Add to your wish list L 120S Special paintwork, superstructure and side panels according to RAL tone
  EXPERT'S REPORT/HANDING OVER
Add to your wish list T 100S Expert's report 25 km/h operating license
Add to your wish list T 150S Expert's report for 40 km/h registration
Add to your wish list T 9000 Transport costs, German post code 0-4
Add to your wish list T 9100 Transport costs, German post code 5-9
Practical examples

Over recent years, we have adapted the HKD 290 to meet the customer's wishes for many tasks. One of our particular strengths: you only pay for what you really need!

Rearwards tipping

Practical examples: Rearwards tipping

Side tipping

Practical examples: Side tipping

Downloads