General


With our hook-lift trailer program we rely exclusively on the proven hook-lift systems from "MEILLER". Alongside out proven chassis technology, we offer you the perfect system solution. Premium quality through and through.

Technical data

Load capacity

Permissible total weight: 31,000 - 34,000kg
Empty weight: approx. 7,500 - 11,600kg *
Tipping / lifting capacity: 30,000kg (incl. the container's own weight)
Drawbar load: 4,000kg up to 40km/h (2,000kg over 40km/h)

Dimensions

Container lengths: 6,250** – 7,500mm
Rollers height: approx. 1,300mm (in the basic equipment)

Technical details

Tipping angle: max. 49 °

*   = depending on equipment

** = can only be tipped in certain cases due to the short container overhang

Basic version

The basic version of the THL 30 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to your wish list Add to your wish list

Tyres 6 x 425/65 R22.5 factory refurbished tyres on centre well rims, approved for 80 km/h
Axles ADR axles 3 x 12 tonnes (60 km/h), 2,150 mm track width (technical 105 km/h), wheel brake 420 x 180 mm, 150 mm square axle
Springs 36 tonnes parabolically suspended linked steering unit with dynamic brake compensation, 1,550 mm axle wheelbase
Steering 3rd axle carried out as self-steering axle, hydraulic lock
Draw gear rigid towing device with Scharmüller round shaft drawbar head Type K80, 4 tonnes drawbar load up to 40 km/h (2 tonnes when more than 40 km/h), mechanical saddle landing gear with rapid speed
Chassis frame integrated frame construction, welded construction, main load bearer made from torsion-resistant square tube profiles
Brake system dual line service brake system with automatic load-dependent brake force control (ALB), 6 x diaphragm brake cylinder, spindle parking brake acting on 2 axles
Hydraulic system The tractor must be equipped with 1 single-acting controller: controller for locking the self-steering axle, on-board hydraulics, "MEILLER“ with multi-piston axial pump 115 litres / minute at 1,000 rotations per minute (up to 280 bar) and hydraulic tank 62 hydraulic tank as well as PTO-shaft drive, PTO-shaft and wireless remote control "ISAR-Control"; the following double-acting functions are controlled by the on-board hydraulics: 1 x picking-up / tipping, 1 x connection for forward and return strokes, 1 x hydraulic internal locking, load-dependent rapid speed switching when putting down with proportional operation of the arm
Hook lift factory new hook lift system brand "MEILLER" Type RK30.70L with hydraulic internal locking mechanism hook height 1570 mm according to DIN 30722-2
Electrics 12 Volt system according to the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, three unit lamps (rubber mounted), number plate lights, position lights
Accessories stable foldable underride protection made from round tube, 2 x wheel chocks with bracket, plastic mudguard one piece, hose cabinet for all supply lines on the drawbar
Paintwork vehicle blasted with steel grit and also degreased, chip-resistant primer, top coat in German quality dual component gloss paint. Hook: Kröger red RAL 3002; Chassis: Kröger red RAL 3002
Additional equipment

To prepare the THL 30 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

  CHASSIS
Add to your wish list F 0488 Additional double-acting function on the control block of the on-board hydraulics
Add to your wish list F 0558 6/2-directional valve for 2 double-acting functions; switching point on a double-acting control unit
Add to your wish list F 1308 Towing device at the rear
Add to your wish list F 1618 Mechanically extendable drive-under protection (required for container lengths longer than 7000 mm)
Add to your wish list F 1858 One-piece aluminium mudguard (these mudguards are mandatory for low-pressure tyres)
Add to your wish list F 2908 Plastic toolbox, dimensions: W 600 x D 500 x H 400
Add to your wish list F 2918 Mains cabinet made of perforated stainless steel sheet metal 610 H x 120 W x 1,000 L
Add to your wish list F 3228 Reinforced height-adjustable, rubber bearing draw bar, dimensioned for 4 tonnes bearing load (mandatory from 4 tonnes bearing load), version as central tube
Add to your wish list F 3258 Hydraulically spring suspended towing device instead of fixed towing device (only in combination with hydraulic jack)
Add to your wish list F 3268 Pulling cylinder between the draw gear + tractor for an improved weight distribution
Add to your wish list F 3298 Double hydraulic support leg instead of the mechanical landing gear (required for forced steering)
Add to your wish list F 4688 Brake system with Duomatik couplings
Add to your wish list F 5108 Side marking lights (LED)
Add to your wish list F 5168 Position and number plate lights as LED version
Add to your wish list F 5178 Warning sign package for wide loads (required from a width of 2750 mm)
Add to your wish list F 5198 3-unit rear lights, round, LED version
Add to your wish list F 5218 2 x LED reversing lights on the rear of the vehicle (12 Volt 3-pin socket required)
Add to your wish list F 5268 Protective grids for the rear lights, screw-on version (not permitted on German public roads)
Add to your wish list F 5278 separate switching box with 2 x toggle switches (on+off) for the operation of two electric functions, power supply via 3-pin socket 12 Volt)
Add to your wish list F 5298 Hydraulic hose marking "Kennfixx" (price per hydraulic pipe)
Add to your wish list F 5408 Separate oil stub line to the rear (diameter 15 mm)
Add to your wish list F 6018 Axle wheelbase > 1800 mm thus possible to increase the total weight to 34 tonnes
Add to your wish list F 6218 BPW Tridem axle unit 3 x 11 tonnes (max. 60 km/h), hydraulically suspended, including forced steering for the 1st and 3rd axles; 2,150 mm track, wheel brake 410 x 180 mm, 150 mm square tube; (only in combination with equipment F 3298 & F 8018, brake cylinder mounted at top)
Add to your wish list F 6618 ADR Tridem axle unit 3 x 11 tonnes (max. 60 km/h), parabolically suspended, including forced steering for the 1st and 3rd axles, 2,150 mm track, wheel brake 420 x 180 mm, 150 mm square tube; (only in combination with equipment F 3298, brake cylinder mounted at bottom)
Add to your wish list F 6738 1st axle designed additionally as self-steering axle, brand ADR
Add to your wish list F 6768 BPW Tridem axle unit 3 x 11 tonnes (max. 60 km/h), parabolically suspended, including forced steering for the 1st and 3rd axles, 2150 mm track, wheel brake 410 x 180 mm, 150 mm square tube; (only in combination with equipment F 3298, brake cylinder mounted at bottom)
Add to your wish list F 7208 1st axle carried out as lift axle (only possible in combination with hydraulic spring suspension)
Add to your wish list F 8018 Electrically switched rear-axle support for hydraulic spring suspension (increased stability)
Add to your wish list F 9028 Electronic load control with signal lamp on the vehicle (only possible in combination with hydraulic spring suspension, 12 Volt, 3-pin socket required)
Add to your wish list F 9038 Signal lamp for the correct closing of the hydraulic container lock (12 V, 3-pin socket required)
Add to your wish list F 9068 Protective cover for container internal lock made from aluminium checkered plate
Add to your wish list F 9268 Central lubrication system BEKA-MAX with 12 Volt electric pump; 1.9 kg grease storage tank; adjustable pump element with overpressure valve for checking the lubricating points - lubricating interval adjustable via a time switch; progressive distributor; designed for up to 65 lubricating points
Add to your wish list F 9308 Tie rods, forced steering (2x) with additional automatic telescope
Add to your wish list F 9548 Wide-angle universal shaft instead of the standard universal shaft
  WHEELS
Add to your wish list R 2405 Tyres, "new" 445/65R22.5 (105 km/h) manufacturer Continental (roller height approx. + 50 mm), tyres with imprint depth + 30 mm, i.e. track is narrower
Add to your wish list R 2585 Tyres "new" 560/60R22.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,000 kg)
Add to your wish list R 2635 Tyres, "new" 650 / 55R26.5 BKT FLOTATION RADIAL, profile FL 630, (65 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5,185 kg)
Add to your wish list R 2645 Tyres "new" 620/60R26.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,310 kg)
Add to your wish list R 2765 Tyres, "new" 600 / 55R26.5 BKT FLOTATION RADIAL, profile FL 630, (65 km/h) 165D, (tyre load at 1.5 bar 10 km/h = 4525 kg)
Add to your wish list R 2675 Tyres, "new" 600/55R26.5 NOKIAN CT BAS (65 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5,000 kg)
Add to your wish list R 2775 Tyres, "new" 650 / 55R26.5 ALLIANCE FLOTATION RADIAL profile I 390 (70 km/h) HEAVY DUTY (tyre load at 1.5 bar 10 km/h = 6700 kg)
Add to your wish list R 2805 Tyres, "new" 650 / 55R26.5 NOKIAN CT BAS (65km/h) 177D, (tyre load at 1.5 bar 10 km/h = 5220 kg)
Add to your wish list R 2815 Tyres, "new" 650 / 55R26.5 BKT FLOTATION RADIAL, profile FL 693, (70 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5,185 kg)
Add to your wish list R 2925 Tyres, "new" 710/50R26.5 BKT FLOTATION RADIAL, profile FL 630, (65 km/h) 170D, (tyre load at 1.5 bar 10 km/h = 5.305 kg)
Add to your wish list R 2935 Tyres "new" 710/50R26.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,615 kg)
Add to your wish list R 2955 Tyres, "new" 710/50R26.5 MICHELIN CARGOXBIB (65 km/h) (tyre load at 1.5 bar 10 km/h = 6,275 kg)
  PAINTWORK
Add to your wish list L 1408 Special paintwork, chassis and hook unit according to RAL tone
  EXPERT'S REPORT/HANDING OVER
Add to your wish list T 150B Expert's report for 40 km/h registration
Add to your wish list T 200B Expert's report for 60 km/h registration (max. 2 tonnes bearing load possible)
Add to your wish list T 5008 Technical instruction on-site
Add to your wish list T 9005 Transport costs, German post code 0-4
Add to your wish list T 9105 Transport costs, German post code 5-9
Practical examples

Over recent years, we have adapted the THL 30 to meet the customer's wishes for many tasks. One of our particular strengths: you only pay for what you really need!

Flexible loading

Practical examples: Flexible loading

Running empty with a raised lifting axle to reduce the tyre wear

Practical examples: Running empty with a raised lifting axle to reduce the tyre wear

Downloads
Download
Standard and ancillary equipment THL30
2017-10_standard_and_ancillary_equipment_thl30.pdf - 167 kB
Download
Product catalogue Hook-lift trailer
kr_agroliner_folder_thl_1711_en_web.pdf - 2 MB