General


 

Our Tridem range gives you loading volumes up to 50 m³ with a maximum permitted total weight of 34 tonnes. Alongside the standard parabolic spring suspension, hydraulic and pneumatic suspension systems are available. In the basic version, both front axles are fixed and the third axle is a self-steering axle. From the manufacturer's view, we recommend a forced steering system for the first and the third axles.

Technical data

Load capacity

Permissible total weight: 31,000 - 34,000kg *
Empty weight: approx. 8,100 - 11,800kg *
Payload: approx. 20,900 - 24,800kg *
Drawbar load: 4,000kg bis 40km/h (2,000kg over 40km/h)
Load volume: approx. 27.0 - 50.0m³ * (sh.: P-MUK402.17.Z1)

Dimensions

Internal cargo area dimensions: approx. 8,000mm L x 2,260mm W x 1,480 - 2,450mm H
External cargo area dimensions: approx. 8,180mm L x 2,550mm W x 1,480 - 2,450mm H

Technical details

Tipping cylinder oil requirement: approx. 48.8 litres (in the basic version)

* = depending on equipment

Basic version

The basic version of the MUK 402 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to your wish list Add to your wish list

Tyres 6 x 425/65 R22.5 factory refurbished tyres on centre well rims, approved for 80 km/h
Axles ADR axles 3 x 12 tonnes (60 km/h), 2,150 mm track width (technical 105 km/h), wheel brake 420 x 180 mm, 150 mm square axle
Springs 36 tonnes parabolically suspended linked steering unit with dynamic brake compensation, 1,550 mm axle wheelbase
Steering 3rd axle carried out as self-steering axle, hydraulic lock
Draw gear rigid towing device with Scharmüller round shaft drawbar head Type K80, 4 tonnes drawbar load up to 40 km/h (2 tonnes when more than 40 km/h), mechanical saddle landing gear with rapid speed
Chassis frame steel-welded construction, main load bearer made from torsion-resistant square tube profiles
Brake system dual line service brake system with automatic load-dependent brake force control (ALB), 6 x diaphragm brake cylinder, spindle parking brake acting on 2 axles
Tipping system rearwards tipping system, hydraulic multi-piston press, 1 line system, hydraulic stroke limiter, safety rope
Steel trough conical rearwards tipping trough (optionally also as two or three-sided tipper - see A 1505/1605), trough with angled shaped side panels, sturdy top frame made from square tube, removable aluminium ladder on the front wall, floor plate thickness of 4 mm, side walls with 3 mm thickness, hydraulic tailgate opening with safety lock and driver display, grain hatch in the middle in the rear wall with removable discharge chute
Electrics 12 Volt system according to the guidelines of the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, 3 chamber lamps (rubber mounted), number plate lighting, position lights
Accessories stable foldable underride protection made from round tube, 2 x wheel chocks with bracket, plastic mudguard on the rear axle, hose cabinet for all supply lines on the drawbar, protective caps for the screw connections, resting point supports for tipping trough for reducing the noise during driving operation
Paintwork vehicle blasted with steel grit and also degreased, chip-resistant primer, sealing of areas in particular risk of corrosion using bodywork sealing compound, top coat in German quality dual-component gloss paint. Tipping trough: Kröger green; Chassis: Kröger red
Additional equipment

To prepare the MUK 402 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

  SUPERSTRUCTURE
Add to your wish list A 1025 Trough height approx. 1730 mm instead of 1480 mm
Add to your wish list A 1045 Trough height approx. 1950 mm instead of 1480 mm (observe the overall vehicle height, delivery without tyres)
Add to your wish list A 1075 Trough height approx. 2200 mm instead of 1480 mm (observe the overall vehicle height, delivery without tyres, only in conjunction with hydraulic suspension)
Add to your wish list A 1255 Trough length 9000 mm instead of 8000 mm (only possible in combination with equipment F 0155)
Add to your wish list A 1505 Two-sided tipping mechanism with swivel side panels, 600 mm high + middle stanchion as well as rubber seal (platform height approx. + 100 mm)
Add to your wish list A 1805 Sidewall extensions (steel) 500 mm, can be folded open all around and can be removed, with viewing window at the front (not cereal grain tight)
Add to your wish list A 1835 Sidewall extensions (steel) 800 mm, can be folded open all around and can be removed, with viewing window at the front (not cereal grain tight)
Add to your wish list A 2611 "Shock-Stop" potato chute (conveyor belt rubber) in the front cargo area
Add to your wish list A 2801 Viewing window with guard screen in the bulkhead, dimensions approx. 355 mm wide and 625 mm high
Add to your wish list A 3005 Side tipping bridge extension 200 mm high, mounted on one side (only in combination with A 1505 or A 1605)
Add to your wish list A 4005 Hydraulic side panel remote unlocking system, on one side (only in combination with A 1505 or A 1605)
Add to your wish list A 5405 Top hydraulically foldable side panel approx. 600 mm (one-sided right or left side) for reducing the overhead loading height (potatoes), operating via the tractor hydraulics, mechanical locking (double-acting control unit required)
Add to your wish list A 5711 2 x additional slide gates with chute in the tailgate (total of 3 items)
Add to your wish list A 6005 Plug-in triangle at the front and rear (300 mm) + 2 x middle triangle with foldable roof arch
Add to your wish list A 6501 Platform with accident protection bar on the bulkhead (according to the German accident prevention regulations - UVV)
Add to your wish list A 7105 Yellow tarpaulin (reinforced material) with aluminium roller pipe, hand crank and removable stop supports on the side (can be fastened with 2 x strap ratchets) (only in combination with A 6005 + A 6501 / can only be used without extension)
Add to your wish list A 7505 2-wing hydraulic cargo area cover system driven by oil motors, covered with a net (e.g. for manure / silage / double-acting control unit and 3-pin 12-V socket required / not compatible with extension)
  CHASSIS
Add to your wish list F 0155 Own oil supply with PTO shaft drive, 130 litre hydraulic pump with 1000 revolutions, 120 litre hydraulic tank, PTO shaft, wireless remote control from the tractor
Add to your wish list F 0551 6/2-directional valve for 2 double-acting functions; switching point on a double-acting control unit
Add to your wish list F 1305 Towing device at the rear
Add to your wish list F 1805 Plastic mudguard, front axle (required for warning panel packet)
Add to your wish list F 3225 Reinforced height-adjustable, rubber bearing draw bar, dimensioned for 4 tonnes bearing load (mandatory from 4 tonnes bearing load), version as central tube
Add to your wish list F 3255 Hydraulically suspended towing device instead of fixed towing device (double-acting control unit required)
Add to your wish list F 3295 Double hydraulic jack instead of the mechanical landing gear (required for forced steering)
Add to your wish list F 4685 Brake system with Duomatik couplings
Add to your wish list F 5105 Side marking lights (LED)
Add to your wish list F 5145 Contour marking film, yellow on the side and rear of the vehicle (mandatory for approval > 60 km/h)
Add to your wish list F 5165 Position and number plate lights as LED version
Add to your wish list F 5175 Warning sign package for wide loads (required from a width of 2750 mm, only in conjunction with F 1805)
Add to your wish list F 5195 3-unit rear lights, round, LED version
Add to your wish list F 5215 2 x LED reversing lights on the rear of the vehicle (12 Volt 3-pin socket required)
Add to your wish list F 5225 Separate LED working floodlight on the front wall for improved illumination of the cargo area (12 volt, 3-pin socket required)
Add to your wish list F 5265 Protective grids for the rear lights, screw-on version (not permitted on German public roads)
Add to your wish list F 5275 separate switching box with 2 x toggle switches (on+off) for the operation of two electric functions, power supply via 3-pin socket 12 Volt)
Add to your wish list F 5291 Hydraulic hose marking "Kennfixx" (price per hydraulic pipe)
Add to your wish list F 5405 Separate oil stub line to the rear (diameter 15 mm)
Add to your wish list F 5425 Assembly of a front screw conveyor (without screw only in combination with F 5405)
Add to your wish list F 5485 Quick lowering for tipping hydraulic via the 2 hose system (double-acting control unit required)
Add to your wish list F 6015 Axle wheelbase > 1,800 mm for 34 tonnes total weight (only in combination with forced steering)
Add to your wish list F 6215 BPW Tridem axle unit 3 x 11 tonnes (max. 60 km/h), hydraulically suspended, including forced steering for the 1st and 3rd axles; 2,150 mm track, wheel brake 410 x 180 mm, 150 mm square tube; (only in combination with equipment F 3295 & F 8015, brake cylinder mounted at top)
Add to your wish list F 6615 ADR Tridem axle unit 3 x 11 tonnes (max. 60 km/h), parabolically suspended, including forced steering for the 1st and 3rd axles, 2,150 mm track, wheel brake 420 x 180 mm, 150 mm square tube; (only in combination with equipment F 3295, brake cylinder mounted at bottom)
Add to your wish list F 6735 1st axle designed additionally as self-steering axle, brand ADR
Add to your wish list F 6765 ADR Tridem axle unit 3 x 11 tonnes (max. 60 km/h), parabolically suspended, including forced steering for the 1st and 3rd axles, 2150 mm track, wheel brake 410 x 180 mm, 150 mm square tube; (only in combination with equipment F 3295, brake cylinder mounted at bottom)
Add to your wish list F 7205 1st axle carried out as lift axle (only possible in combination with hydraulic spring suspension)
Add to your wish list F 8015 Electrically switched rear-axle support for hydraulic spring suspension (increased stability)
Add to your wish list F 9025 Electronic load control with signal lamp on the vehicle (only possible in combination with hydraulic spring suspension, 12 Volt, 3-pin socket required)
Add to your wish list F 9305 Tie rods, forced steering (2x) with additional automatic telescope
  WHEELS
Add to your wish list R 2405 Tyres, "new" 445/65R22.5 (105 km/h) manufacturer Continental (platform height approx. + 50 mm), rims with imprint depth + 30 mm, i.e. track is narrower
Add to your wish list R 2585 Tyres "new" 560/60R22.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,000 kg)
Add to your wish list R 2635 Tyres, "new" 650/55R26.5 BKT FLOTATION RADIAL, profile FL 630, (65 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5,185 kg)
Add to your wish list R 2645 Tyres "new" 620/60R26.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,310 kg)
Add to your wish list R 2765 Tyres, "new" 600/55R26.5 BKT FLOTATION RADIAL, profile FL 630, (65 km/h) 165D, (tyre load at 1.5 bar 10 km/h = 4525 kg)
Add to your wish list R 2925 Tyres, "new" 710/50R26.5 BKT FLOTATION RADIAL, profile FL 630, (65 km/h) 170D, (tyre load at 1.5 bar 10 km/h = 5305 kg)
Add to your wish list R 2935 Tyres "new" 710/50R26.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,615 kg)
  PAINTWORK
Add to your wish list L 1005 Special paintwork, chassis according to RAL tone
Add to your wish list L 1305 Special paintwork, trough according to RAL tone
Add to your wish list L 1505 Stone chipping protection coating under the tipping bridge in the area above the wheels
  EXPERT'S REPORT/HANDING OVER
Add to your wish list T 1505 Expert's report for 40 km/h registration
Add to your wish list T 2005 Expert's report for 60 km/h registration (max. 2 tonnes bearing load permitted)
Add to your wish list T 9005 Transport costs, German post code 0-4
Add to your wish list T 9105 Transport costs, German post code 5-9
Practical examples

Over recent years, we have adapted the MUK 402 to meet the customer's wishes for many tasks. One of our particular strengths: you only pay for what you really need!

Potatoe harvest

Practical examples: Potatoe harvest

Tipper trailer use

Practical examples: Tipper trailer use

Unloading cereal harvest

Practical examples: Unloading cereal harvest

Dump trailer with 	2 wing hydraulic cargo area cover system at potatoe harvest

Practical examples: Dump trailer with 2 wing hydraulic cargo area cover system at potatoe harvest

At the Potatoe Europe, we presented our MUK 402 in action

Practical examples: At the Potatoe Europe, we presented our MUK 402 in action