With our hook-lift trailer program we rely exclusively on the proven hook-lift systems from "MEILLER". Alongside out proven chassis technology, we offer you the perfect system solution. Premium quality through and through.
The basic version of the THL 30 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:
| Tyres | 6 x 425/65 R22.5 factory refurbished tyres on centre well rims, approved for 80 km/h |
|---|---|
| Axles | ADR axles 3 x 12 tonnes (60 km/h), 2150 mm track width (technical 105 km/h), wheel brake 420 x 180 mm, 150 mm square axle |
| Springs | 36 tonnes parabolically suspended linked steering unit with dynamic brake compensation, 1550 mm axle wheelbase |
| Steering | 3rd axle carried out as self-steering axle, hydraulic lock |
| Draw gear | rigid towing device with Scharmüller parallel shank drawbar head Type K80, 4 tonnes drawbar load up to 40 km/h (2 tonnes when more than 40 km/h), mechanical saddle landing gear with rapid speed |
| Chassis frame | integrated frame construction, welded construction, main load bearer made from torsion-resistant square tube profiles square tube profiles |
| Brake system | dual line service brake system with automatic load-dependent brake force control (ALB), 6 x diaphragm brake cylinder, spindle parking brake acting on 2 axles |
| Hydraulic system | The tractor must be equipped with 1 single-acting controller: controller for locking the self-steering axle, on-board hydraulics, "MEILLERâ with multi-piston axial pump 115 litres / minute at 1000 rotations per minute (up to 300 bar) and hydraulic tank 62 hydraulic tank as well as PTO-shaft drive, PTO-shaft and wireless remote control "ISAR-Control"; the following double-acting functions are controlled by the on-board hydraulics: 1 x picking-up / tipping, 1 x connection for forward and return strokes, 1 x hydraulic internal locking, load-dependent rapid speed switching when putting down with proportional operation of the arm |
| Hook lift | factory new hook lift system brand "MEILLER" Type RK30.70L with hydraulic internal locking mechanism hook height 1570 mm according to DIN 30722-1 (main container load bearer 180 mm) |
| Electrics | 12 Volt system according to the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, 3 function rear lights (rubber mounted), number plate lights, position lights |
| Accessories | stable foldable underride protection made from round tube, 2 x wheel chocks with bracket, plastic mudguard one piece, hose cabinet for all supply lines on the drawbar |
| Paintwork | Vehicle sprayed, dressed, degreased and additionally phosphated, Chassis: cathodic dip painted (CDP), top coat using powder coating; Hook system: top coat in Germany quality dual component gloss paint. Hook: Kröger red RAL 3002; Chassis: Kröger red RAL 3002 |
To prepare the THL 30 in the best way for special tasks, we offer a wide range of options:
(You can add the individual items of optional equipment to the wish list using the + symbol.)
| CHASSIS | ||
|---|---|---|
|
F 0488 | Additional double-acting function on the control block of the on-board hydraulics |
|
|
F 0558 | 6/2-directional valve for 2 double-acting functions; switching point on a double-acting control unit |
|
|
F 1308 | Towing device at the rear |
|
|
F 1618 | Mechanically extendable underride protection (required for container lengths longer than 7000 mm) |
|
|
F 1858 | One-piece aluminium mudguard (these mudguards are mandatory for low-pressure tyres) |
|
|
F 2708 | Side collision protection (not necessary behind an agricultural or forestry tractor) |
|
|
F 2908 | Plastic toolbox |
|
|
F 2918 | Mains cabinet made of perforated stainless steel sheet metal 610 H x 120 W x 1000 L |
|
|
F 3228 | Reinforced height-adjustable, rubber bearing drawbar, dimensioned for 4 tonnes drawbar load (mandatory from 4 tonnes drawbar load), version as central tube |
|
|
F 3258 | Hydraulically spring suspended towing device instead of fixed towing device (only in combination with hydraulic jack) |
|
|
F 3268 | Pulling cylinder between the draw gear + tractor for an improved weight distribution |
|
|
F 3298 | Double hydraulic support leg instead of the mechanical landing gear (required for forced steering) |
|
|
F 4688 | Brake system with Duomatik couplings |
|
|
F 5108 | Side marking lights (LED) |
|
|
F 5168 | Position and number plate lights as LED version |
|
|
F 5178 | Warning sign package for wide loads (required from a width of 2750 mm) |
|
|
F 5198 | 3 function rear lights, round, LED version |
|
|
F 5188 | 3 function rear lights, angular, LED version |
|
|
F 5218 | 2 x LED reversing lights on the rear of the vehicle (operated via the on-board hydraulics' remote control of the hook) |
|
|
F 5238 | 2 x LED reversing lights on the side of the chassis (operated via the on-board hydraulics' remote control) |
|
|
F 5268 | Protective grids for the rear lights, screw-on version (not permitted on German public roads) |
|
|
F 5298 | Hydraulic hose marking "Kennfixx" (price per hydraulic pipe) |
|
|
F 5318 | 3/2 directional valve in front of hydraulic control block as a switching point between the control block and pressure and return lines (required when operating pumps/consultation required) |
|
|
F 5408 | Separate oil stub line to the rear (diameter 15 mm) |
|
|
F 6018 | Axle wheelbase > 1800 mm thus possible to increase the total weight to 34 tonnes (only with m. F 4608) |
|
|
F 6218 | BPW Tridem axle unit 3 x 11 tonnes (max. 60 km/h), hydraulically suspended, including forced steering for the 1st and 3rd axles; 2150 mm track, wheel brake 410 x 180 mm, 150 mm square axle; (only in combination with equipment F 3298 & F 8018, brake cylinder mounted at top) |
|
|
F 6738 | 1st axle designed additionally as self-steering axle, brand ADR |
|
|
F 7208 | 1st axle carried out as lifting axle (only possible in combination with hydraulic spring suspension) |
|
|
F 8018 | Electrically switched rear-axle support for hydraulic spring suspension (increased stability) |
|
|
F 9028 | Electronic load control with signal lamp on the vehicle (only possible in combination with hydraulic spring suspension, 12 Volt, 3-pin socket required) |
|
|
F 9038 | Signal lamp for the correct closing of the hydraulic container lock |
|
|
F 9068 | Protective cover for container internal lock made from aluminium checkered plate |
|
|
F 9268 | Central lubrication system BEKA-MAX with 12 Volt electric pump; 1.9 kg grease storage tank; adjustable pump element with overpressure valve for checking the lubricating points - lubricating interval adjustable via a time switch; progressive distributor; designed for up to 65 lubricating points |
|
|
F 9308 | Tie rods, forced steering (2x) with additional automatic telescope |
|
|
F 9548 | Wide-angle universal shaft instead of the standard universal shaft |
| WHEELS | ||
|
|
R 2405 | Tyres, "new" 445/65R22.5 (105 km/h) manufacturer Windpower, type WTR69 (catwalk height approx. + 50 mm), rims with imprint depth + 30 mm, i.e. track is narrower |
|
|
R 2595 | Tyres "new" 560/60R22.5 NOKIAN Country King (65 km/h) 161D with reinforced rims 20.00 (tyre load at 1.5 bar 10 km/h = 5000 kg) |
|
|
R 2645 | Tyres "new" 620/60R26.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,310 kg) |
|
|
R 2675 | Tyres "new" 600/55R26.5 NOKIAN CT BAS (65 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5000 kg) (reinforced construction site tyres, not suitable for soft ground) |
|
|
R 2775 | Tyres, "new" 650/55R26.5 ALLIANCE FLOTATION RADIAL profile I 390 (70 km/h) 178D, HEAVY DUTY (tyre load at 1.5 bar 10 km/h = 6700 kg, reinforced construction site tyres) |
|
|
R 2805 | Tyres "new" 650/55R26.5 NOKIAN CT BAS (65 km/h) 177D, (tyre load at 1.5 bar 10 km/h = 5220 kg, reinforced construction site tyres, not suitable for soft ground) |
|
|
R 2815 | Tyres, "new" 650/55R26.5 BKT FLOTATION RADIAL, profile FL 693, (70 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5,185 kg) |
|
|
R 2885 | Tyres, "new" 710/50R26.5 BKT FLOTATION RADIAL, profile FL 693, (70 km/h) 170D, (tyre load at 1.5 bar 10 km/h = 5305 kg) |
|
|
R 2935 | Tyres "new" 710/50R26.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,615 kg) |
|
|
R 2955 | Tyres, "new" VF 710/50R26.5 MICHELIN CARGOXBIB (65 km/h), 176D, (tyre load at 1.5 bar 10 km/h = 6,275 kg) |
| PAINTWORK | ||
|
|
L 1408 | Special paintwork, chassis and hook unit according to RAL tone |
| EXPERT'S REPORT/HANDING OVER | ||
|
|
T 150B | Expert's report for 40 km/h registration |
|
|
T 200B | Expert's report for 60 km/h registration (max. 2 tonnes drawbar load possible) |
|
|
T 5008 | Technical instruction on-site |
|
|
T 9005 | Transport costs, German post code 0-4 |
|
|
T 9105 | Transport costs, German post code 5-9 |
Over recent years, we have adapted the THL 30 to meet the customer's wishes for many tasks. One of our particular strengths: you only pay for what you really need!
Practical examples: Flexible loading
Practical examples: Running empty with a raised lifting axle to reduce the tyre wear
Our THL 30 hook-lift trailer can be customized to meet your needs:
CHASSIS
F 1308 Towing device
F 1618 extendable underride protection
F 1858 One-piece aluminium mudguard
F 2908 Plastic toolbox size: w 600 x d 500 x h 400
F 3228 height-adjustable draw bar
F 3238 Top pressure cylinder
F 3258 Hydraulically suspended draw gear
F 3268 Pulling cylinder for weight distribution
F 3298 Double hydraulic support leg
F 3395 electronic forced steering
F 5178 Warning sign package for wide loads
F 5218 LED reversing lights
F 5268 Protective grids for the rear lights
F 5298 Kennfixx Hydraulic hose marking
F 9038 Signal lamp for the correct closing
F 9268 central lubrication system BEKA-MAX
Standard and ancillary equipment THL30
2019-05_standard_and_ancillary_equipment_thl30.pdf - 141 kB
2019-05_standard_and_ancillary_equipment_thl30.pdf - 141 kB
Product catalogue Hook-lift trailer
2019-10_brochure_hook-lift_trailer_thl20_thl30_en_web.pdf - 5 MB
2019-10_brochure_hook-lift_trailer_thl20_thl30_en_web.pdf - 5 MB
