HKD 402 - Kröger Nutzfahrzeuge [EN]

The agroliner three-axle three-sided tipper is designed for tractor and truck use. This vehicle gives optimum transport performance, however, only with a truck tractor unit which is also fitted with a tipper body. The maximum permitted total tractor weight of 40 tonnes cannot be achieved when pulled behind a tractor.

Technical data

Load capacity
Permissible total weight:	24,000 kg
Empty weight*:	approx. 6,400 kg (in the basic version)
Payload*:	approx. 17,600 kg
Load volume*:	approx. 24.8 - 32.4 m³

Dimensions
Platform height:	approx. 1,420 mm
Internal cargo area dimensions*:	approx. 7,880 mm L x 2,420 mm W x 1,300 - 1,700 mm H
External cargo area dimensions*:	approx. 7,950 mm L x 2,550 mm W x 1,300 - 1,700 mm H

Technical details
Tipping cylinder oil requirement:	approx. 39.9 litres

* = depending on equipment

Basic version

The basic version of the HKD402 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to notelist

Tyres	6 x 385/65R22.5 factory refurbished tyres on centre well rims, approved for 80 km/h
Axles	GIGANT tapered roller bearing axles, 3 x 9 tonnes axle load approved up to 105 km/h, (without ABS, up to 60 km/h), 2040 mm track, wheel brake 420 x 180 mm, axles equipped with ABS and automatic slack adjuster (automatic slack adjuster)
Springs	GIGANT parabolic-suspension composite suspension unit with dynamic brake load compensation on the double axle approved up to 105 km/h
Steering	Turntable steering with ball rim and type-tested triangular drawbar, height adjustable as well as drawbar relief
Chassis frame	welded steel construction; double T main load bearer
Brake system	dual line service brake system with automatic load-dependent brake force control (ALB), 6 x diaphragm brake cylinder, spindle parking brake acting on 2nd axle
Tipping system	3-way tipper; hydraulic multi-piston press with cardanic suspension, 1 line system, ball tipper bearings with retainer at the rear, two unmistakable locking pins, hydraulic stroke limiter, safety rope
Tipper frame	profile steel in welded construction, 4 mm steel floor plate
Bulkhead	fixed made from webbed combined multiplex board 18 mm, WBP pasted, in the board wall area, use of stainless steel bolts; fixed corner posts, ergonomic access ladder with catwalk and accidence protection bar in accordance with German accident prevention regulations (UVV) regulations, folding step outside and on the inside of the bulkhead
Side board walls:	webbed combined multiplex board as with the bulkhead embedded in aluminium profile (with integrated water drain) with robust rubber seals that can be replaced, 3 side board walls each without horizontal partitioning, fixed centre posts with two removable connecting tubes each, split, central bottom unlocking, bottom unlocking lever at the front and rear with top dead point tensioner, optimally designed for the equipping of an automatic side board wall remote unlocking system
Tailgate	basic design is the same as the side board wall with an 1 grain feed in the middle (480 x 290 mm) with lever operation (left side) and removable discharge chute, fixed corner stanchions, central bottom, bottom unlocking lever at the left with top dead point tensioner
Electrical system:	12 volt system according to the guidelines of the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, 3 function lights (rubber mounted), number plate lights, position lights
Accessories	stable underride protection according to EC Directives, number plate bracket, 2 x wheel chocks with bracket, protective caps on the screw connections, resting point supports for tipping bridge for reducing the noise during driving operation, plastic mudguard on the front axle and rear axle, park sockets for all connections on the drawbar
Paintwork	vehicle blasted with steel grit and also degreased, chip-resistant primer, sealing of areas in particular risk of corrosion using bodywork sealing compound, two-component corrosion protection top coat in German quality two-component gloss paint Superstructure: Kröger green, panels = covered with "green" film on both sides, not UV resistant Chassis: Kröger red

Additional equipment

To prepare the HKD402 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

	SUPERSTRUCTURE
	A 0504	LIGHT version, weight-optimised version Weight saving of up to 250 kg (depending on the equipment) Floor plate 3 mm instead of 4 mm. No loss in stability by using high-tensile special steels
	A 0604	Board walls with plastic lightweight panels, 20 mm thick, board wall height 1500 mm, (colour white or in combination with L 1204, not suitable for direct filling by woodchippers)
	A 0624	Board walls with plastic lightweight panels, 20 mm thick, board wall height 1700 mm, (colour white or in combination with L 1204, not suitable for direct filling by woodchippers)
	A 1004	Board wall height 1500 mm instead of 1300 mm Info: multiplex boards (coated with phenolic resin film on both sides, not UV resistant)
	A 1274	Superstructure length 7000 mm instead of 7950 mm with 3 x side board walls
	A 1284	Superstructure length 7500 mm instead of 7950 mm with 3 x side board walls
	A 2614	"Shock-Stop" potato chute (conveyor belt rubber) in the front cargo area
	A 2644	6 x "pro" lashing eyes on both sides (when lowered, flush with body floor)
	A 2654	6 x "basic" lashing eyes on both sides (with stepped, open troughs in the body floor)
	A 2704	Mobile aluminium stepladder clamped onto the bulkhead
	A 2804	Viewing window with guard grille in the bulkhead
	A 2934	Operation of the bottom unlocking system for the middle side board wall on the left and right sides via separate top dead point tensioners mounted on the bulkhead (total of 4 items)
	A 3004	Side tipping bridge extension 200 mm high, can be mounted on both sides
	A 3104	Side tipping bridge extension 200 mm high, mounted on both sides
	A 3154	Side bottom unlocking hooks, with threaded bushings on both sides
	A 4004	Hydraulic side board wall remote unlocking system on one side, can be re-positioned on the right and left side as required
	A 4104	Hydraulic side board wall remote unlocking system, can be mounted on both sides
	A 4154	Brackets for the hydraulic side board wall remote unlocking system on both sides, without hydraulic lines and stamp
	A 5004	Pneumatic side board wall remote unlocking system on one side, can be re-positioned on the right and left side as required
	A 5104	Pneumatic side board wall remote unlocking system, mounted on both sides
	A 5704	Additional slide gate with chute in the tailgate (total of 2 items right + left)
	A 5714	2 x additional slide gates with chute in the tailgate (total of 3 items)
	A 6004	Plug-in triangle at the front and rear (300 mm) + 2 x middle triangle with foldable roof arch
	A 7104	Yellow tarpaulin (reinforced material) with aluminium roller board, hand crank and removable stop supports on the side (can be fastened on the side with 3 x strap ratchets)
	A 8004	Side board walls partitioned horizontally with rubber sealing system, on one side left or right only
	A 8104	Side board walls partitioned horizontally with rubber sealing system, partitioned on both sides left or right
	A 8204	Tailgate partitioned horizontally with rubber sealing system
	A 8404	Centre posts partitioned on one side, right or left
	A 8454	Centre post partitioned on both sides, right and left
	A 9054	Centre post can be folded and removed completely, on one side left or right only
	A 9204	Tailgate as portal can be pivoted open by 270°
	A 9304	Side board walls (3 x) also as portal can be pivoted open to the outside from the middle, including adjustable eccentric bolts, per side
	CHASSIS
	F 1304	Towing device at the rear
	F 1654	ECE type-approved underride guard permanently mounted at the rear, cannot be swivelled (mandatory for approval > 60 km/h with commercial tractor)
	F 1964	Spray protection in the plastic mudguard (mandatory for approval > 60 km/h)
	F 2704	Side collision protection (mandatory for registration > 60 km/h with commercial tractor)
	F 2854	Drawbar support for drawbar type Klemmfix
	F 2904	Toolbox plastic Dimensions: 630 W x 480 D x 450 H
	F 3004	Length-adjustable Y-type drawbar 27to (adjustment range 2000 - 2600mm), supply cables designed as coiled cables
	F 3054	Reinforced Y-drawbar (26 tonnes), 2100 mm long
	F 4004	A.B.S. 24 volt
	F 4104	E.B.S. Electronic brake system, 24 volt
	F 4114	E.B.S. Electronic brake system, multi-voltage 12/24 volts, manufacturer Wabco
	F 4604	Automatic parking brake (spring-type cylinder)
	F 4654	Separate release valve for front axle
	F 4684	Brake system with Duomatik couplings
	F 4854	Removeable voltage converter for light systems from 24 volt to 12 volt (not suitable for continuous operation)
	F 4954	Voltage converter for light systems from 12 volt to 24 volt permanently mounted on the chassis
	F 5004	24 volt lighting system
	F 5014	Power supply for light system 15 pin instead of 2 x 7 pin
	F 5104	Side marking lights (LED) and white position lights at the front for approval 105 km/h
	F 5144	Contour marking film, yellow on the side and rear of the vehicle (mandatory for approval > 60 km/h)
	F 5164	Position and number plate lights as LED version (24 volt light system required)
	F 5184	3 function rear lights, angular, LED version (permitted only up to 60 km/h)
	F 5194	5 function rear lights LED version with fog light and reversing light (second 24 volt 7-pin connection required)
	F 5204	5 function rear lights with fog light and reversing light (second 24 volt 7-pin connection required)
	F 5214	2 x LED reversing lights on the rear of the vehicle
	F 5234	2 x LED reversing lights on the side of the chassis
	F 5404	Separate oil stub line to the rear (diameter 15 mm)
	F 7004	Air suspension with quick-lowering system without lifting/lowering function (for approval of more than 60 km/h, only in combination with EBS)
	F 7104	Air suspension with quick-lowering system and lifting/lowering function (for approval of more than 60 km/h, only in combination with EBS)
	F 7204	2nd axle carried out as lifting axle (only in combination with air suspension, controlled manually)
	WHEELS
	R 0104	Tyre pressure monitoring (mandatory for registration > 60 km/h with commercial tractor, only in conjunction with F 4104 or F 4114)
	R 2004	Tyres, "new" 385/65R22.5 (105 km/h) manufacturer PIRELLI Pro Trailer (EU Tyre Label B,A,70)
	R 2204	Tyres, "new" 425/65R22.5 (105 km/h) (platform height approx. + 50 mm)
	R 2404	Tyres, "new" 445/65R22.5 (105 km/h) (platform height approx. + 50 mm)
	R 2464	Tyres, "new" 560/60 R22.5 BKT FLOTATION RADIAL, profiles FL 693 M, (70 km/h), (platform height approx. + 220 mm), rims with offset ID + 30 mm, i.e. track gets narrower
	R 2594	Tyres "new" 560/60R22.5 NOKIAN Country King (65 km/h) 161D with reinforced rims 20.00 (tyre load at 1.5 bar 10 km/h = 5,000 kg) (platform height approx. + 220 mm)
	PAINTWORK
	L 1004	Special paintwork, chassis according to RAL tone
	L 1204	Special paintwork, superstructure and side board walls according to RAL tone
	L 1504	Stone chipping protection coating under the tipping bridge in the area above the wheels
	EXPERTS REPORT/HANDING OVER
	T 1504	Expert's report for 40 km/h registration (net price cannot be discounted)
	T 2004	Expert's report for 60 km/h registration (net price cannot be discounted)
	T 3004	Expert opinion for 105 km/h approval (net price not discountable, only in combination with F 1654, F 1964, F 2704, F 4004 or F 4104, F 5104, F 5144, F 5194 o.5204, R 0104, R 2004)
	T 9004	Transport costs, German post code 0-4 (net price cannot be discounted)
	T 9104	Transport costs, German post code 5-9 (net price cannot be discounted)