HKD402

The agroliner three-axle three-sided tipper is designed for tractor and truck use. This vehicle gives optimum transport performance, however, only with a truck tractor unit which is also fitted with a tipper body. The maximum permitted total tractor weight of 40 tonnes cannot be achieved when pulled behind a tractor.

Technical data
Load capacity  
Permissible total weight: 24,000 kg
Empty weight*: approx. 6,400 kg (in the basic version)
Payload*: approx. 17,600 kg
Load volume*: approx. 24.8 - 32.4 m³
Dimensions  
Platform height: approx. 1,420 mm
Internal cargo area dimensions*: approx. 7,880 mm L x 2,420 mm W x 1,300 - 1,700 mm H
External cargo area dimensions*: approx. 7,950 mm L x 2,550 mm W x 1,300 - 1,700 mm H
Technical details  
Tipping cylinder oil requirement: approx. 39.9 litres

* = depending on equipment

Basic version

The basic version of the HKD402 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to notelist

Tyres 6 x 385/65R22.5 factory refurbished tyres on centre well rims, approved for 80 km/h
Axles GIGANT tapered roller bearing axles, 3 x 9 tonnes axle load approved up to 105 km/h, (without ABS, up to 60 km/h), 2040 mm track, wheel brake 420 x 180 mm, axles equipped with ABS and automatic slack adjuster (automatic slack adjuster)
Springs parabolically suspended GIGANT linked steering unit with dynamic brake compensation on the double axle approved up to 105 km/h; overload protection for the rear parabolic spring suspension
Steering Turntable steering with ball rim and type-tested triangular drawbar, height adjustable as well as drawbar relief
Chassis frame welded steel construction; double T main load bearer
Brake system dual line service brake system with automatic load-dependent brake force control (ALB), 6 x diaphragm brake cylinder, spindle parking brake for the rear axle
Tipping system 3-way tipper; hydraulic multi-piston press with cardanic suspension, 1 line system, ball tipper bearings with retainer at the rear, two unmistakable locking pins, hydraulic stroke limiter, safety rope
Tipper frame profile steel in welded construction, 4 mm steel floor plate
Bulkhead fixed, made from webbed combined multiplex board, 18 mm, WBP pasted, coated on outside only with green plastic PPL in the board wall area, use of stainless steel VA bolts, fixed corner rungs, ergonomic access ladder with catwalk and accidence protection bar in accordance with German accident prevention regulations (UVV) regulations, folding step outside and on the inside of the bulkhead
Side board walls: webbed combined multiplex board as with the bulkhead embedded in aluminium profile (with integrated water drain) with robust rubber seals that can be replaced, 3 side board walls each without horizontal partitioning, fixed centre posts with two removable connecting tubes each, split, central bottom unlocking, bottom unlocking lever at the front and rear with top dead point tensioner, optimally designed for the equipping of an automatic side board wall remote unlocking system
Tailgate basic design is the same as the side board walls with an 1 grain feed in the middle (480 x 290 mm) with lever operation (left side) and removable discharge chute, fixed corner stanchions, central bottom, bottom unlocking lever at the left with top dead point tensioner
Electrical system: 12 volt system according to the guidelines of the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, 3 function lights (rubber mounted), number plate lights, position lights
Accessories stable underride protection according to EC Directives, number plate bracket, 2 x wheel chocks with bracket, protective caps on the screw connections, resting point supports for tipping bridge for reducing the noise during driving operation, plastic mudguard on the front axle and rear axle, park sockets for all connections on the drawbar
Paintwork vehicle blasted with steel grit and also degreased, chip-resistant primer, sealing of areas in particular risk of corrosion using bodywork sealing compound, two-component corrosion protection top coat in German quality two-component gloss paint Superstructure: Kröger green, panels = "green" on outside, PPL plastic-coated, UV-resistant Chassis: Kröger red
Additional equipment

To prepare the HKD402 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

SUPERSTRUCTURE
A 0504 LIGHT version, weight-optimised version Weight saving of up to 250 kg (depending on the equipment) Floor plate 3 mm instead of 4 mm. No loss in stability by using high-tensile special steels
A 0604 Board walls with plastic lightweight panels, 20 mm thick, board wall height 1500 mm, (colour white or in combination with L 1204, not suitable for direct filling by woodchippers)
A 0624 Board walls with plastic lightweight panels, 20 mm thick, board wall height 1700 mm, (colour white or in combination with L 1204, not suitable for direct filling by woodchippers)
A 2104 Side board wall height 1500 mm instead of 1300 mm
A 1274 Superstructure length 7000 mm instead of 7950 mm with 3 x side board walls
A 1284 Superstructure length 7500 mm instead of 7950 mm with 3 x side board walls
A 2614 "Shock-Stop" potato chute (conveyor belt rubber) in the front cargo area
A 2644 6 x "pro" lashing eyes on both sides (when lowered, flush with body floor)
A 2654 6 x "basic" lashing eyes on both sides (with stepped, open troughs in the body floor)
A 2704 Mobile aluminium stepladder clamped onto the bulkhead
A 2804 Viewing window with guard grille in the bulkhead
A 2934 Operation of the bottom unlocking system for the middle side board walls on the left and right sides via separate top dead point tensioners mounted on the bulkhead (total of 4 items)
A 3004 Side tipping bridge extension 200 mm high, can be mounted on both sides
A 3104 Side tipping bridge extension 200 mm high, mounted on both sides
A 3154 Side bottom unlocking hooks, with threaded bushings on both sides
A 3204 Removable rear tipping bridge extension, over the whole vehicle width (W 2480 mm x L 350 mm)
A 4004 Hydraulic side board wall remote unlocking system on one side, can be re-positioned on the right and left side as required
A 4104 Hydraulic side board wall remote unlocking system, can be mounted on both sides
A 4154 Brackets for the hydraulic side board wall remote unlocking system on both sides, without hydraulic lines and stamp
A 5004 Pneumatic side board wall remote unlocking system on one side, can be re-positioned on the right and left side as required
A 5104 Pneumatic side board wall remote unlocking system, mounted on both sides
A 5704 Additional slide gate with chute in the tailgate (total of 2 items right + left)
A 5714 2 x additional slide gates with chute in the tailgate (total of 3 items)
A 6004 Plug-in triangle at the front and rear (300 mm) + 2 x middle triangle with foldable roof arch
A 7104 Yellow tarpaulin (reinforced material) with aluminium roller board, hand crank and removable stop supports on the side (can be fastened on the side with 3 x strap ratchets)
A 8004 Side board walls partitioned horizontally with rubber sealing system, on one side left or right only
A 8104 Side board walls partitioned horizontally with rubber sealing system, partitioned on both sides left or right
A 8204 Tailgate partitioned horizontally with rubber sealing system
A 8404 Centre posts partitioned on one side, right or left
A 8454 Centre post partitioned on both sides, right and left
A 9054 Centre post can be folded and removed completely, on one side left or right only
A 9204 Tailgate as portal can be pivoted open by 270°
A 9304 Side board walls (3 x) also as portal can be pivoted open to the outside from the middle, including adjustable eccentric bolts, per side
CHASSIS
F 1304 Towing device at the rear
F 1964 Spray protection in the plastic mudguard (mandatory for approval > 60 km/h)
F 2804 Bracket for spare wheel with jack on the vehicle
F 2854 Drawbar support for drawbar type Klemmfix
F 2904 Plastic toolbox, dimensions: W 600 mm x D 500 mm x H 400 mm
F 3004 Length-adjustable Y-drawbar 27 tonnes (adjustment range 2000-2600 mm)
F 3054 Reinforced Y-drawbar (26 tonnes), 2100 mm long
F 4004 A.B.S. 24 volt
F 4104 E.B.S. Electronic brake system, 24 volt
F 4114 E.B.S. Electronic brake system, multi-voltage 12/24 volts, manufacturer Wabco
F 4604 Automatic parking brake (spring-type cylinder)
F 4654 Separate release valve for front axle
F 4684 Brake system with Duomatik couplings
F 4854 Removeable voltage converter for light systems from 24 volt to 12 volt (not suitable for continuous operation)
F 4954 Voltage converter for light systems from 12 volt to 24 volt permanently mounted on the chassis
F 5004 24 volt lighting system
F 5014 Power supply for light system 15 pin instead of 2 x 7 pin
F 5104 Side marking lights (LED) and white position lights at the front for approval 105 km/h
F 5144 Contour marking film, yellow on the side and rear of the vehicle (mandatory for approval > 60 km/h)
F 5164 Position and number plate lights as LED version (24 volt light system required)
F 5184 3 function rear lights, angular, LED version (permitted only up to 60 km/h)
F 5194 5 function rear lights LED version with fog light and reversing light (second 24 volt 7-pin connection required)
F 5204 5 function rear lights with fog light and reversing light (second 24 volt 7-pin connection required)
F 5214 2 x LED reversing lights on the rear of the vehicle
F 5234 2 x LED reversing lights on the side of the chassis
F 5404 Separate oil stub line to the rear (diameter 15 mm)
F 5424 Assembly of a front screw conveyor (without screw only in combination with F 5404)
F 6334 9 tonnes BPW axles (105 km/h), Type ECO Plus 2, 2040 mm track, ABS fitted, automatic slack adjuster, disc brakes TSB 4309 (ground clearance for off-road vehicles limited significantly, only in combination with F 4604)
F 6354 9 tonnes BPW axles (105 km/h), Type ECO Plus 2, 2040 mm track, with ABS fitted, automatic slack adjuster, wheel brake 420 x 180 mm
F 7004 Air suspension with quick-lowering system without lifting/lowering function (for approval of more than 60 km/h, only in combination with EBS)
F 7104 Air suspension with quick-lowering system and lifting/lowering function (for approval of more than 60 km/h, only in combination with EBS)
F 7204 2nd axle carried out as lifting axle (only in combination with air suspension, controlled manually)
WHEELS
R 2004 Tyres, "new" 385/65R22.5 (105 km/h) manufacturer PIRELLI Triathlon (EU Tyre Label B,A,70)
R 2204 Tyres, "new" 425/65R22.5 (105 km/h) (platform height approx. + 50 mm)
R 2404 Tyres, "new" 445/65R22.5 (105 km/h) (platform height approx. + 50 mm)
R 2464 Tyres, "new" 560/60 R22.5 BKT FLOTATION RADIAL, profiles FL 693 M, (70 km/h), (catwalk height approx. + 220 mm), rims with imprint depth ID + 30 mm, i.e. track gets narrower
R 2594 Tyres "new" 560/60R22.5 NOKIAN Country King (65 km/h) 161D with reinforced rims 20.00 (tyre load at 1.5 bar 10 km/h = 5,000 kg) (catwalk height approx. + 220 mm)
PAINTWORK
L 1004 Special paintwork, chassis according to RAL tone
L 1204 Special paintwork, superstructure and side board walls according to RAL tone
L 1504 Stone chipping protection coating under the tipping bridge in the area above the wheels
EXPERTS REPORT/HANDING OVER
T 1504 Expert's report for 40 km/h registration
T 2004 Expert's report for 60 km/h registration
T 3004 Expert's report for 105 km/h registration (only in combination with F 1964, F 4004 or F 4104, F 5104, F 5144, 5194 or F 5204, R 2004)
T 9004 Transport costs, German post code 0-4
T 9104 Transport costs, German post code 5-9
Downloads

Notelist

Would you like to find out more?

There is also a contact person for your region:

Matthias Oelkers
Sales - external
(north - centre - east DE; DK)
+49 173 / 6484847
Markus Borchers
Sales - external
(central - west DE; LU)
+49 177 / 7963617
Peter Franz
Sales - external
(south - central DE, AT)
+49 171 / 9572155
Symen van der Veen
Sales - external
(BE; NL; LU)
+31 6515 72523
Sándor Fazekas
Sales - external
(BG; CZ; HR; HU; RO; RS; SK; SL)
+49 176 / 66456951
Julian Franke
Sales - internal / shipping

+49 4445 / 96 36 - 39
Oliver Krohse
Sales manager

+49 4445 / 96 36 - 24

©2022. Peter Kröger GmbH