|
SUPERSTRUCTURE |
|
A 142V |
Floor plate "HARDOX450" or "RAEX450" or "Durostat450" 6 mm wear and surface pressure-resistant steel |
|
|
A 145V |
Side board walls "HARDOX450" or "RAEX450" or "Durostat450" 6 mm including front and rear board walls, wear and surface pressure-resistant steel |
|
|
A 146V |
Floor plate "HARDOX450" or "RAEX450" or "Durostat450" 8 mm wear and surface pressure-resistant steel |
|
|
A 270V |
Mobile aluminium stepladder mounted on the side of the chassis |
|
|
A 271V |
Holder for broom and shovel mounted on the side of the chassis |
|
|
A 567V |
Tension locks on the tailgate right and left via threaded rod with eyebolt |
|
|
CHASSIS |
|
F 130V |
Towing device at the rear |
|
|
F 270V |
Side collision protection (mandatory for approval > 40 km/h) |
|
|
F 322V |
Reinforced height-adjustable, rubber bearing drawbar, dimensioned for 4 tonnes drawbar load (mandatory from 4 tonnes drawbar load), version as central tube |
|
|
F 325V |
Hydraulically height-adjustable towing device damped via nitrogen accumulator (only in conjunction with hydraulic jack) |
|
|
F 328V |
Hydraulic jack instead of the mechanical landing gear (double-acting control unit required) |
|
|
F 332V |
SCHARMÜLLER parallel shank drawbar head Type K80 up to 4 tonnes drawbar load |
|
|
F 463V |
ALB valve for swivel axle unit instead of manual force control (only in combination with F 325V) |
|
|
F 464V |
Mechanical ALB valve for swivel axle unit instead of manual force control (in combination with F 322V) |
|
|
F 468V |
Brake system with Duomatik couplings |
|
|
F 514V |
Contour marking film, yellow on the side and rear of the vehicle (mandatory for approval > 60 km/h) |
|
|
F 516V |
Position and number plate lights as LED version |
|
|
F 518V |
3 function rear lights, angular, LED version |
|
|
F 521V |
2 x LED reversing lights on the rear of the vehicle (12 volt 3-pin socket required) |
|
|
F 523V |
2 x LED lateral reversing lights on the chassis (12-volt 3-pin socket required) |
|
|
F 526V |
Protective grids for the rear lights, screw-on version (not permitted on German public roads) |
|
|
F 527V |
Separate switching box with 3 x toggle switches (on+off) consisting of 1 x main switch and 2 x for electrical functions (power supply via 3-pin socket, 12 volts) |
|
|
F 529V |
Hydraulic hose marking "Kennfixx" (price per hydraulic pipe) |
|
|
F 548V |
Quick-lowering system for tipping hydraulic via the 2 hose system (double-acting control unit required) |
|
|
F 601V |
Axle wheelbase > 1800 mm for 24 tonnes total weight (only in combination with F 621V) |
|
|
F 620V |
Hydraulic spring system including BPW axles (max. 60 km/h), track width 2150 mm; second axle forced steering, 12 tonnes axle load (at 40 km/h); wheel brake 410 x 180 mm; 150 mm square axle (brake cylinder mounted at top) |
|
|
F 621V |
Hydraulic spring system including BPW axles (max. 60 km/h), track 2150 mm; second axle forced steering, 11 tonnes axle load (at 40 km/h); 410 x 180 mm wheel brake; 150 mm square axle (brake cylinder mounted at top) |
|
|
F 691V |
22 tonnes swivel axle unit with 16,5 tonnes ADR axles, (max. 40 km/h), 2050 mm track width, unsprung with trailer brake valve and manual force control (without ALB), wheel brake 420 x 180 mm, 150 mm square axle |
|
|
F 692V |
22 tonnes swivel axle unit with BPW axles, (max. 40 km/h), 2050 mm track width, unsprung with trailer brake valve and manual force control (without ALB), wheel brake 410 x 180 mm, 150 mm square axle |
|
|
F 720V |
1st axle carried out as lifting axle (only possible in combination with hydraulic spring suspension) |
|
|
F 801V |
Electrically switched rear-axle support for hydraulic spring suspension (increased stability) |
|
|
F 902V |
Electronic load control with signal lamp on the vehicle (only possible in combination with hydraulic spring suspension, 12 volt , 3-pin socket required) |
|
|
F 926V |
Central lubrication system with 12 Volt electric pump for Kröger MUP20SP (standard springs & pendulum), 1.2 kg grease storage tank; adjustable pump element with overpressure valve for checking the lubricating points - lubricating interval adjustable via a time switch; progressive distributor; designed for up to 23 lubricating points (12 volt 3-pin socket required) |
|
|
F 927V |
Central lubrication system with 12 volt electric pump for Kröger MUP20SP (hydraulic suspension & steering axle), 1.2 kg grease storage tank; adjustable pump element with overpressure valve for checking the lubricating points - lubricating interval adjustable via a time switch; progressive distributor; designed for up to 29 lubricating points (12 volt 3-pin socket required) |
|
|
F 930V |
Tie rod, forced steering, with additional automatic telescope |
|
|
Info: |
For forced-steering axles, a cracked push rod with a mount for ball K50 is supplied as standard. A straight push rod with locking pin can also be supplied as an alternative. |
|
|
WHEELS |
|
R 263V |
Tyres "new" 650/55R26.5 BKT FLOTATION RADIAL ULTRA, profile FL 630, (65 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5,185 kg) |
|
|
R 267V |
Tyres "new" 600/55 R26.5 NOKIAN CT BAS (65 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5000 kg), (reinforced construction site tyres, not suitable for soft ground) |
|
|
R 276V |
Tyres, "new" 600/55R26.5 BKT FLOTATION RADIAL ULTRA, profile FL 630, (65 km/h) 165D, (tyre load at 1.5 bar 10 km/h = 4525 kg) |
|
|
R 277V |
Tyres, "new" 650/55R26.5 ALLIANCE FLOTATION RADIAL profile I 390 (65 km/h) 178D, HEAVY DUTY (tyre load at 1.5 bar 10 km/h = 6700 kg, reinforced construction site tyres) |
|
|
R 280V |
Tyres "new" 650/55R26.5 NOKIAN CT BAS (65 km/h) 177D, (tyre load at 1.5 bar 10 km/h = 5220 kg, reinforced construction site tyres, not suitable for soft ground) |
|
|
R 281V |
Tyres "new" 650/55R26.5 BKT FLOTATION RADIAL, profile FL 693, (65 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5,185 kg) |
|
|
R 300V |
Tyres, "new" 24R20.5 MICHELIN XS (width 602mm), (80 km/h) 176F, (tyre load at 1.5 bar 10 km/h = 5000 kg) |
|
|
R 335V |
Tyres, "new" 650/55R26.5 BKT FLOTATION RADIAL, profile FL 693, (65 km/h), 178D, HEAVY DUTY (tyre load at 1.5 bar 10 km/h = 6000 kg, reinforced construction site tyres) |
|
|
R 347V |
Tyres "new" 650/55R26.5 BKT FLOTATION RADIAL, profile FL 695, (65km/h), 178D, STEEL BELTED (tyre load at 1.5 bar 10km/h = 5500 kg, reinforced construction site tyres, not for not suitable for soft ground) |
|
|
Info: |
At a total external width of 2750 mm or greater, equipment F 517V warning sign package must be selected! |
|
|
PAINTWORK |
|
L 100V |
Special paintwork, chassis according to RAL tone |
|
|
L 130V |
Special paintwork, trough according to RAL tone |
|
|
L 150V |
Stone chipping protection coating on the tipping bridge in the area above the wheels |
|
|
EXPERT'S REPORT/HANDING OVER |
|
T 151V |
40 km/h approval according to EU type approval, delivery with COC papers
(net price not discountable) |
|
|
T 201V |
60 km/h approval according to EU type approval, delivery with COC papers
(net price not discountable, only in conjunction with F 270V) |
|
|
T 900V |
Transport costs, German post code 0-4 (net price cannot be discounted) |
|
|
T 910V |
Transport costs, German post code 5-9 (net price cannot be discounted) |
|