PWO 18 (Bales) - Kröger Nutzfahrzeuge [EN]

Technical data

Load capacity
Permissible total weight:	18,000 kg
Empty weight*:	approx. 4,550 kg
Payload:	approx. 13,450 kg

Dimensions
Total vehicle length*:	approx. 11,670 mm
Total vehicle width:	approx. 2,470 mm (outside)
Load length*:	approx. 9,850 mm
Platform height*:	approx. 1,300 mm

* = depending on equipment.

Basic version

The basic version of the PWO18 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to notelist

Tyres	4 x 385/65 R22.5 "NEW" on centre rims 80km/h
Axles	ADR tapered roller bearing axle, 2 x 11.3 tonnes axle load (105 km/h), 2050 mm track width without ABS up to 60 km/h, wheel brake 406 x 120 mm, 130 mm square axle
Springs	18 tonnes 2 layer parabolic spring suspension, 100 mm wide, approved for up to 105 km/h
Steering	Turntable steering with ball bearing turntable and type-tested triangular drawbar 1,990 mm, height adjustment via tension spring and turnbuckle
Brake system	dual line service brake system with automatic load-dependent brake force control (ALB), 4 x diaphragm brake cylinder, spindle parking brake for the rear axle
Chassis frame	welded steel construction; double T main load bearer
Plateau	4 mm steel floor, 6 x lashing points on the outer side frame profile (12 x in total)
Electrical system:	12 volt system according to the guidelines of the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors and white front position lights, 3 function lights (rubber mounted), number plate lights, position lights on the rear
Accessories	ECE type-approved underride protection, license plate holder, wheel chock with holder, rear plastic mudguards, park sockets for all connections on the drawbar
Paintwork	vehicle blasted with steel grit and also degreased, chip-resistant primer, sealing of areas in particular risk of corrosion using bodywork sealing compound, top coat in German quality dual-component gloss paint. Colouring: Kröger green

Additional equipment

To prepare the PWO18 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

	SUPERSTRUCTURE
	A 100P	Fixed, anodised aluminium front wall, 800 mm high
	A 101P	Fixed, anodised aluminium front wall, 1000 mm high
	A 114P	Cargo area reduction according to customer requirement instead of 9850 mm (custom-built)
	A 116P	Loading area extension to 10,000 mm instead of 9850 mm through 150 mm bolted spacer plate (only possible in combination with F 300P)
	A 117P	Loading area extension to 10,250 mm instead of 9,850 mm (only possible in conjunction with F 300P)
	A 133P	4 mm ST52 floor plate designed as tread plate instead of smooth floor panel
	A 170P	Foldable frame board walls on the sides and rear approx. 600 mm high (box transport), incl. foldable and removable posts (only in combination with A 100P or A 101P)
	A 171P	Foldable frame side and rear walls, approximately 800mm high (for crate transport), including gas struts on both sides of the side walls, as well as foldable and removable stakes (only in combination with A 100P or A 101P)
	A 172P	Foldable frame side and rear walls, approximately 1000mm high (for crate transport), including gas struts on both sides of the side walls, as well as foldable and removable stakes (only in combination with A 101P)
	A 250P	Anodised aluminium board walls 600 mm high, 3 x sides, 1 x rear, foldable and removable, including foldable and removable posts (only in combination with A 100P or A 101P)
	A 251P	Anodised aluminium board walls 800 mm high, 3 x sides, 1 x rear, foldable and removable, including foldable and removable posts (only in combination with A 100P or A 101P)
	A 259P	Lateral left + right screwable support edge made of C-profile (steel) and 25mm corrugation (hot-dip galvanised), inner width approx. 2430mm, mounted on the outer frame profile in the row of holes for lashing points incl. fastening possibility for lashing strap
	A 263P	Additional lashing points in the outer frame profile (standard = 12 pieces, 6 pieces per side), price per piece
	A 264P	14 x additional lashing points on both sides in the outer frame profile (40 x in total)
	A 266P	Additional tensioning strap on each side between the bale supports at a height of 1,000 mm (only in conjunction with A 550P)
	A 268P	Lateral support edge (steel), screw-on version on left + right, edge dimensions approx. 70mm W x 60 mm H, interior width approx 2330 mm, installed on the outer frame profile in the row of holes for lashing points incl. mounting options for lashing strap for transporting standing round bales
	A 270P	Mobile aluminium stepladder clamped onto the chassis
	A 275P	Extension ladded installed on the side underneath the chassis for access to the cargo area
	A 350P	hydraulically lowerable square tubes (painted) on both sides over the whole length for load securing; front and rear side board walls as grid frames, approx. 1000 mm high (box transport)
	A 352P	hydraulically lowerable square tubes (painted) on both sides (over the whole length for load securing; front and rear side board walls as grid frames, approx. 2200 mm high (box transport)
	A 355P	hydraulically lowerable pipe support for securing boxes on both sides (only in conjunction with A 352P)
	A 361P	hydraulic bale transport securing system on both sides over the whole length, front and rear board walls designed as fixed bale grid approx. 2200 mm high (horizontal partitioning with screw flange), lower tube contact height approx. 1060 mm, upper tube approx. 2300 mm (other contact heights on request)
	A 365P	Hydraulic bale transport securing system on both sides with lowerable gates made of steel pipes over the whole length, front and rear board walls designed as fixed bale gates approx. 2200 mm high (horizontal partitioning with screw flange, only in combination with F 300P or F 305P)
	A 370P	Screw-on bale grille elevation 300 mm at the front and rear (only in comb. with A 361P or A 365P)
	A 550P	Bale supports front and rear with adjustable tilt, rear bale support with 1100 mm extension, folding and locking swivel rungs with tensioning straps for securing the load from the side (not in combination with board walls or hydr. bale transport securing system)
	A 650P	Catwalk with accident protection bar on the front wall (in accordance with German accident prevention regulations UVV) incl. mounting step on the drawbar (only possible in conjunction with A 100P or A 101P equipment)
	CHASSIS
	F 130P	Towing device at the rear
	F 180P	Plastic mudguards for the front axle (quarter circle)
	F 189P	Plastic mudguards (quarter circle) additionally mounted on the second axle
	F 270P	Side impact protection (mandatory for approval >40 km/h)
	F 285P	Drawbar support for drawbar type Klemmfix
	F 290P	Toolbox plastic Dimensions: 630 W x 480 D x 450 H
	F 300P	Length-adjustable Y-type drawbar, adjustment range 1500 - 2100mm, supply cables designed as coiled cables
	F 305P	Reinforced Y-drawbar (26 tonnes), 1900 mm long
	F 460P	Automatic parking brake (spring-type cylinder)
	F 464P	Additional ALB valve mounted on the rear axle
	F 465P	Separate release valve for front axle
	F 468P	Brake system with Duomatik couplings
	F 471P	"Kennfixx Air" handles for compressed air brake lines on the drawbar
	F 516P	Position and number plate lights as LED version
	F 518P	3 function rear lights, angular, LED version
	F 521P	2 x LED reversing lights on the rear of the vehicle (12 volt 3-pin socket required)
	F 523P	2 x LED lateral reversing lights on the chassis (12 volt 3-pin socket required)
	F 526P	Protective grids for the rear lights, screw-on version (not permitted on German public roads)
	F 529P	Hydraulic hose marking "Kennfixx" (price per hydraulic pipe)
	F 625P	3 layer parabolic spring suspension, 100 mm wide for 10 tonnes axle load (105 km/h)
	F 632P	12.9 tonnes ADR axles (105 km/h), reinforced, 2050 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm, 150 mm square axle
	F 915P	Rubber buffer mounted on the rear axle
	F 916P	Plastic wall-protective profile below the side board walls (in conjunction with foldable side board walls)
	WHEELS
	R 200P	Tyres, "new" 385/65 R22.5 (105 km/h), manufactured by PROMETEON (PIRELLI) Pro Trailer (B, A, 70)
	R 220P	Tyres, "new" 425/65 R22.5 (105 km/h), (platform height approx. + 40 mm)
	R 239P	Tyres, "new" 455/40 R22.5 (100 km/h), 160 J TL ADVANCE GL251 Plus EU (Tyre Label C,C,72), (catwalk height approx. - 70 mm)
	R 240P	Tyres, "new" 445/65R22.5 (105 km/h) (platform height approx. + 50 mm)
	R 243P	Tyres, "new" 500/60R22.5 NOKIAN Country King (40 km/h), rims with offset + 30 mm, i.e. track gets narrower (platform height approx. + 100 mm)
	R 248P	Tyres, "new" 500/60 R22.5 BKT FLOTATION RADIAL, tread FL 693 M, (65 km/h), 155D, rims with offset +30 mm, i.e., track gets narrower (platform height approx. 100 mm)
	R 245P	Tyres, "new" 560/45 R22.5 BKT FLOTATION RADIAL, tread FL 693 M, (65 km/h), 152D, rims with offset 30 mm, i.e., track gets narrower
	R 246P	Tyres, "new" 560/60 R22.5 BKT FLOTATION RADIAL, tread FL 693 M, (65 km/h), 161D, rims with offset +30 mm, i.e., track gets narrower (platform height approx. 100 mm)
	PAINTWORK
	L 145P	Special paintwork, chassis and superstructure according to RAL tone
	L 150P	Stone chipping protection coating under the superstructure in the area above the wheels
	EXPERT'S REPORT/HANDING OVER
	T 151P	40 km/h approval according to EU type approval, supplied with Coc documents (net price not discountable)
	T 201P	60 km/h approval according to EU type approval, supplied with Coc documents (net price not discountable, only in conjunction with F 270P & only possible with tyres up to 445/65 R22.5)
	T 420P	Dekra load securing certificate (net price not discountable, only possible in conjunction with A 361P or A 365P)
	T 900P	Transport costs, German post code 0-4 (net price cannot be discounted)
	T 910P	Transport costs, German post code 5-9 (net price cannot be discounted)