PWO18 (Boxes) - Kröger Nutzfahrzeuge [EN]

Technical data

Load capacity
Permissible total weight:	18,000 kg
Empty weight*:	approx. 4,550 kg
Payload:	approx. 13,450 kg

Dimensions
Total vehicle length*:	approx. 11,670 mm
Total vehicle width:	approx. 2,460 mm
Load length*:	approx. 9,800 mm
Platform height*:	approx. 1,300 mm

* = depending on equipment.

Basic version

The basic version of the PWO18 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to notelist

Tyres	4 x 385/65 R22.5 factory refurbished tyres on centre well rims 80 km/h permitted
Axles	ADR tapered roller bearing axle, 2 x 11.3 tonnes axle load (105 km/h), 2050 mm track width without ABS up to 60 km/h, wheel brake 406 x 120 mm, 130 mm square axle
Springs	18 tonnes 2 layer parabolic spring suspension, 100 mm wide, approved for up to 105 km/h
Steering	Turntable steering with ball bearing turntable and type-tested triangular drawbar 1,990 mm, Height adjustable as well as drawbar relief
Brake system	dual line service brake system with automatic load-dependent brake force control (ALB), 4 x diaphragm brake cylinder, spindle parking brake for the rear axle
Chassis frame	welded steel construction; double T main load bearer
Plateau	4 mm steel floor, lashing points on the outer frame profile every 500 mm
Electrical system:	12 volt system according to the guidelines of the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, 3 function lights (rubber mounted), number plate lights, position lights
Accessories	stable underride protection, number plate bracket, wheel chocks with bracket, plastic mudguard at the rear, park sockets for all connections on the drawbar
Paintwork	vehicle blasted with steel grit and also degreased, chip-resistant primer, sealing of areas in particular risk of corrosion using bodywork sealing compound, top coat in German quality dual-component gloss paint Colouring: Kröger green

Additional equipment

To prepare the PWO18 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

	SUPERSTRUCTURE
	A 100P	Fixed, anodised aluminium front wall, 800 mm high
	A 101P	Fixed, anodised aluminium front wall, 1000 mm high
	A 114P	Cargo area reduction according to customer requirement instead of 9850 mm (custom-built)
	A 116P	Loading area extension to 10,000 mm instead of 9850 mm through 150 mm bolted spacer plate (only possible in combination with F 300P)
	A 170P	Foldable frame board walls on the sides and rear approx. 600 mm high (box transport), incl. foldable and removable posts (only in combination with A 100P or A 101P)
	A 171P	Foldable frame board walls on the sides and rear approx. 800 mm high (box transport), incl. foldable and removable posts (only in combination with A 100P or A 101P)
	A 172P	Foldable frame board walls on the sides and rear approx. 1000 mm high (box transport), incl. foldable and removable posts (only in combination with A 101P)
	A 250P	Anodised aluminium board walls 600 mm high, 3 x sides, 1 x rear, foldable and removable, including foldable and removable posts (only in combination with A 100P or A 101P)
	A 251P	Anodised aluminium board walls 800 mm high, 3 x sides, 1 x rear, foldable and removable, including foldable and removable posts (only in combination with A 100P or A 101P)
	A 266P	Additional tensioning strap on each side between the bale supports at a height of 1,000 mm (only in conjunction with A 550P)
	A 268P	Lateral support edge (steel), screw-on version on left + right, edge dimensions approx. 70mm W x 60 mm H, interior width approx 2330 mm, installed on the outer frame profile in the row of holes for lashing points incl. mounting options for lashing strap for transporting standing round bales
	A 269P	Lateral support edge (galvanized steel), screw-on version on left + right, edge dimensions approx. 30 mm W x 35 mm H, interior width approx 2410 mm, installed on the outer frame profile in the row of holes for lashing points incl. mounting options for lashing strap for transporting standing square bales
	A 270P	Mobile aluminium stepladder clamped onto the chassis
	A 272P	Tarpaulin hooks on the side underneath the outer frame profile, installed every 500 mm
	A 275P	Extension ladded installed on the side underneath the chassis for access to the cargo area
	A 350P	Hydraulically lowerable square tube (galvanised) on both sides over the whole length for load securing, front and rear board walls designed as grid frames approx. 1000 mm high (box transport)
	A 361P	Hydraulic bale transport securing system on both sides over the whole length, front and rear board walls designed as fixed bale grids approx. 2200 mm high (horizontal partitioning with screw flange)
	A 365P	Hydraulic bale transport securing system on both sides with lowerable gates made of steel pipes over the whole length, front and rear board walls designed as fixed bale gates approx. 2200 mm high (horizontal partitioning with screw flange, only in combination with F 300P or F 305P)
	A 370P	Screw-on bale grille elevation 300 mm at the front and rear (only in comb. with A 361P or A 365P)
	A 550P	Bale supports front and rear with adjustable tilt, rear bale support with 1100 mm extension, folding and locking swivel rungs with tensioning straps for securing the load from the side (not in combination with board walls or hydr. bale transport securing system)
	A 555P	Stroke support for swivel rungs (only in conjunction with equipment A 550P)
	A 650P	Catwalk with accident protection bar on the front wall (in accordance with German accident prevention regulations UVV) incl. mounting step on the drawbar (only possible in conjunction with A 100P or A 101P equipment)
	CHASSIS
	F 130P	Towing device at the rear
	F 180P	Plastic mudguards for the front axle (quarter circle)
	F 270P	Side collision protection (not necessary behind an agricultural or forestry tractor)
	F 285P	Drawbar support for drawbar type Klemmfix
	F 290P	Plastic toolbox, dimensions: W 600 mm x D 500 mm x H 400 mm
	F 300P	Length-adjustable Y-drawbar (adjustment range 1,500-2,100 mm)
	F 305P	Reinforced Y-drawbar (26 tonnes), 1900 mm long
	F 460P	Automatic parking brake (spring-type cylinder)
	F 464P	Additional ALB valve mounted on the rear axle
	F 465P	Separate release valve for front axle
	F 468P	Brake system with Duomatik couplings
	F 510P	Side marking lights (LED)
	F 516P	Position and number plate lights as LED version
	F 518P	3 function rear lights, angular, LED version
	F 521P	2 x LED reversing lights on the rear of the vehicle (12 volt 3-pin socket required)
	F 523P	2 x LED lateral reversing lights on the chassis (12 volt 3-pin socket required)
	F 526P	Protective grids for the rear lights, screw-on version (not permitted on German public roads)
	F 527P	Separate switching box with 3 x toggle switches (on+off) consisting of 1 x main switch and 2 x for electrical functions (power supply via 3-pin socket, 12 volts)
	F 529P	Hydraulic hose marking "Kennfixx" (price per hydraulic pipe)
	F 625P	3 layer parabolic spring suspension, 100 mm wide for 10 tonnes axle load (105 km/h)
	F 632P	12.9 tonnes ADR axles (105 km/h), reinforced, 2050 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm, 150 mm square axle
	F 645P	9 tonnes GIGANT axles (105 km/h), 2,040 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm (approved only for tyres up to 445/65 R22.5)
	F 915P	Rubber buffer mounted on the rear axle
	F 916P	Plastic wall-protective profile below the side board walls (in conjunction with foldable side board walls)
	WHEELS
	R 200P	Tyres, "new" 385/65R22.5 (105 km/h) manufacturer PIRELLI Triathlon (EU Tyre Label B,A,70)
	R 220P	Tyres, "new" 425/65 R22.5 (105 km/h), (platform height approx. + 40 mm)
	R 239P	Tyres, "new" 455/40 R22.5 (100 km/h), 160 J TL ADVANCE GL251 Plus EU (Tyre Label C,C,72), (catwalk height approx. - 70 mm)
	R 240P	Tyres, "new" 445/65R22.5 (105 km/h) (platform height approx. + 50 mm)
	R 243P	Tyres, "new" 500/60R22.5 NOKIAN Country King (40 km/h), rims with offset + 30 mm, i.e. track gets narrower (platform height approx. + 100 mm)
	R 245P	Tyres, "new" 560/45 R22.5 BKT FLOTATION RADIAL, profile FL 693 M, (70 km/h), rims with imprint depth ID + 30 mm, i.e. track gets narrower
	R 246P	Tyres, "new" 560/60 R22.5 BKT FLOTATION RADIAL, profile FL 693 M, (70 km/h), rims with offset +30 mm, i.e. track gets narrower (platform height approx. + 100 mm)
	R 259P	Tyres "new" 560/60R22.5 NOKIAN Country King (65 km/h) 161D with reinforced rims 20.00 (tyre load at 1.5 bar 10 km/h = 5,000 kg) (catwalk height approx. + 100 mm)
	PAINTWORK
	L 145P	Special paintwork, chassis and superstructure according to RAL tone
	L 150P	Stone chipping protection coating under the superstructure in the area above the wheels
	EXPERTS REPORT/HANDING OVER
	T 150P	Expert's report for 40 km/h registration
	T 200P	Expert's report for 60 km/h registration
	T 420P	Dekra load-securing certificate (only possible in combination with A 361P & A 365P)
	T 900P	Transport costs, German post code 0-4
	T 910P	Transport costs, German post code 5-9