PWO24

Technical data
Load capacity  
Permissible total weight: 24,000 kg
Empty weight*: approx. 4,850 kg
Payload: approx. 19,150 kg
Dimensions  
Total vehicle length*: approx. 11,670 mm
Total vehicle width: approx. 2,460 mm
Load length*: approx. 9,800 mm
Platform height*: approx. 1,300 mm

* = depending on equipment.

Basic version

The basic version of the PWO24 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to notelist

Tyres 6 x 385/65 R22.5 factory refurbished tyres on centre well rims 80 km/h permitted
Axles ADR tapered roller bearing axle, 3 x 11.3 tonnes axle load (105 km/h), 2050 mm track width without ABS up to 60 km/h, wheel brake 406 x 120 mm, 130 mm square axle
Springs 2-layer parabolic spring suspension, 100 mm wide, approved for up to 105 km/h, overload protection on all 6 springs, rocker arms between the 2nd and 3rd axle
Steering Turntable steering with ball bearing turntable and type-tested triangular drawbar 1,990 mm, Height adjustable as well as drawbar relief
Brake system dual line service brake system with automatic load-dependent brake force control (ALB), 2x, 6 x diaphragm brake cylinder; spindle parking brake acting on 2nd axle
Chassis frame welded steel construction; double T main load bearer
Plateau 4 mm steel floor, lashing points on the outer frame profile every 500 mm
Electrical system: 12 volt system according to the guidelines of the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, 3 function lights (rubber mounted), number plate lights, position lights
Accessories stable underride protection, number plate bracket, wheel chocks with bracket, plastic mudguard at the rear, park sockets for all connections on the drawbar
Paintwork vehicle blasted with steel grit and also degreased, chip-resistant primer, sealing of areas in particular risk of corrosion using bodywork sealing compound, top coat in German quality two-component gloss paint Colouring: Kröger green
Additional equipment

To prepare the PWO24 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

SUPERSTRUCTURE
A 100P1 Fixed, anodised aluminium front wall, 800 mm high
A 101P1 Fixed, anodised aluminium front wall, 1000 mm high
A 114P1 Cargo area reduction according to customer requirement instead of 9850 mm (custom-built)
A 116P1 Loading area extension to 10,000 mm instead of 9850 mm through 150 mm bolted spacer plate (only possible in combination with F 300P1)
A 170P1 Foldable frame board walls on the sides and rear approx. 600 mm high (box transport), incl. foldable and removable posts (only in combination with A 100P1 or A 101P1)
A 171P1 Foldable frame board walls on the sides and rear approx. 800 mm high (box transport), incl. foldable and removable posts (only in combination with A 100P1 or A 101P1)
A 172P1 Foldable frame board walls on the sides and rear approx. 1000 mm high (box transport), incl. foldable and removable posts (only in combination with A 101P1)
A 250P1 Anodised aluminium board walls 600 mm high, 3 x sides, 1 x rear, foldable and removable, including foldable and removable posts (only in combination with A 100P1 or A 101P1)
A 251P1 Anodised aluminium board walls 800 mm high, 3 x sides, 1 x rear, foldable and removable, including foldable and removable posts (only in combination with A 100P1 or A 101P1)
A 266P1 Additional tensioning strap on each side between the bale supports at a height of 1,000 mm (only in combination with A 550P1)
A 268P1 Lateral support edge (steel), screw-on version on left + right, edge dimensions approx. 70mm W x 60 mm H, interior width approx 2330 mm, installed on the outer frame profile in the row of holes for lashing points incl. mounting options for lashing strap for transporting standing round bales
A 269P1 Lateral support edge (galvanized steel), screw-on version on left + right, edge dimensions approx. 30 mm W x 35 mm H, interior width approx 2410 mm, installed on the outer frame profile in the row of holes for lashing points incl. mounting options for lashing strap for transporting standing square bales
A 270P1 Mobile aluminium stepladder clamped onto the chassis
A 272P1 Tarpaulin hooks on the side underneath the outer frame profile, installed every 500 mm
A 275P1 Extension ladded installed on the side underneath the chassis for access to the cargo area
A 350P1 Hydraulically lowerable square tube (galvanised) on both sides over the whole length for load securing, front and rear board walls designed as grid frames approx. 1000 mm high (box transport)
A 361P1 Hydraulic bale transport securing system on both sides over the whole length, front and rear board walls designed as fixed bale grids approx. 2,200 mm high (horizontal partitioning with screw flange)
A 365P1 Hydraulic bale transport securing system on both sides with lowerable gates made of steel pipes over the whole length, front and rear board walls designed as fixed bale gates approx. 2200 mm high (horizontal partitioning with screw flange, only in combination with F 300P1 or F 305P1)
A 370P1 Screw-on bale grille elevation 300 mm at the front and rear (only in comb. with A 361P1 or A 365P1)
A 550P1 Bale supports front and rear with adjustable tilt, rear bale support with 1,100 mm extension, folding and locking swivel rungs with tensioning straps for securing the load from the side (not in combination with board walls or hydr. bale transport securing system)
A 555P1 Stroke support for swivel rungs (only in conjunction with equipment A 550P1)
A 650P1 Catwalk with accident protection bar on the front wall (in accordance with German accident prevention regulations UVV) incl. mounting step on the drawbar (only possible in conjunction with A 100P1 or A 101P1 equipment)
CHASSIS
F 130P1 Towing device at the rear
F 180P1 Plastic mudguards for the front axle (quarter circle)
F 270P1 Side collision protection (not necessary behind an agricultural or forestry tractor)
F 285P1 Drawbar support for drawbar type Klemmfix
F 290P1 Plastic toolbox, dimensions: W 600 mm x D 500 mm x H 400 mm
F 300P1 Length-adjustable Y-drawbar (adjustment range 1,500-2,100 mm)
F 305P1 Reinforced Y-drawbar (26 tonnes), 1900 mm long
F 460P1 Automatic parking brake (spring-type cylinder)
F 465P1 Separate release valve for front axle
F 468P1 Brake system with Duomatik couplings
F 510P1 Side marking lights (LED)
F 516P1 Position and number plate lights as LED version
F 518P1 3 function rear lights, angular, LED version
F 521P1 2 x LED reversing lights on the rear of the vehicle (12 volt 3-pin socket required)
F 523P1 2 x LED lateral reversing lights on the chassis (12 volt 3-pin socket required)
F 526P1 Protective grids for the rear lights, screw-on version (not permitted on German public roads)
F 527P1 Separate switching box with 3x toggle switches (on+off) consisting of 1x main switch and 2x for electrical functions (power supply via 3-pin socket, 12 volt)
F 529P1 Hydraulic hose marking "Kennfixx" (price per hydraulic pipe)
F 632P1 12.9 tonnes ADR axles (105 km/h), reinforced, 2050 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm, 150 mm square axle
F 645P1 9 tonnes GIGANT axles (105 km/h), 2,040 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm (approved only for tyres up to 445/65 R22.5)
F 673P1 Rear axle forced-steered, 9 tonnes ADR forced-steering axle (max. 60 km/h), 2050 mm track, wheel brake 406 x 120 mm, 130 mm, square axle (Ackerman steering)
F 906P1 Protective covers for steering axle brake cylinder (only in combination with F 673P1)
F 915P1 Rubber buffer mounted on the rear axle
F 916P1 Plastic wall-protective profile below the side board walls (in conjunction with foldable side board walls)
WHEELS
R 200P1 Tyres, "new" 385/65R22.5 (105 km/h) manufacturer PIRELLI Triathlon (EU Tyre Label B,A,70)
R 220P1 Tyres, "new" 425/65 R22.5 (105 km/h), (platform height approx. + 40 mm)
R 239P1 Tyres, "new" 455/40 R22.5 (100 km/h), 160 J TL ADVANCE GL251 Plus EU (Tyre Label C,C,72), (catwalk height approx. - 70 mm)
R 240P1 Tyres, "new" 445/65R22.5 (105 km/h) (platform height approx. + 50 mm)
R 243P1 Tyres, "new" 500/60R22.5 NOKIAN Country King (40 km/h), rims with offset + 30 mm, i.e. track gets narrower (platform height approx. + 100 mm)
R 245P1 Tyres, "new" 560/45 R22.5 BKT FLOTATION RADIAL, profile FL 693 M, (70 km/h), rims with imprint depth ID + 30 mm, i.e. track gets narrower
R 246P1 Tyres, "new" 560/60 R22.5 BKT FLOTATION RADIAL, profile FL 693 M, (70 km/h), rims with offset +30 mm, i.e. track gets narrower (platform height approx. + 100 mm)
R 259P1 Tyres "new" 560/60R22.5 NOKIAN Country King (65 km/h) 161D with reinforced rims 20.00 (tyre load at 1.5 bar 10 km/h = 5,000 kg) (catwalk height approx. + 100 mm)
PAINTWORK
L 145P1 Special paintwork, chassis and superstructure according to RAL tone
L 150P1 Stone chipping protection coating under the superstructure in the area above the wheels
EXPERTS REPORT/HANDING OVER
T 150P1 Expert's report for 40 km/h registration
T 200P1 Expert's report for 60 km/h registration
T 420P1 Dekra load-securing certificate (only possible in combination with A 361P1 & A 365P1)
T 900P1 Transport costs, German post code 0-4
T 910P1 Transport costs, German post code 5-9
Downloads

Notelist

Would you like to find out more?

There is also a contact person for your region:

Matthias Oelkers
Sales - external
(north - centre - east DE; DK)
+49 173 / 6484847
Markus Borchers
Sales - external
(central - west DE; LU)
+49 177 / 7963617
Peter Franz
Sales - external
(south - central DE, AT)
+49 171 / 9572155
Symen van der Veen
Sales - external
(BE; NL; LU)
+31 6515 72523
Sándor Fazekas
Sales - external
(BG; CZ; HR; HU; RO; RS; SK; SL)
+49 176 / 66456951
Julian Franke
Sales - internal / shipping

+49 4445 / 96 36 - 39
Oliver Krohse
Sales manager

+49 4445 / 96 36 - 24

©2022. Peter Kröger GmbH