PWO24 (Boxes) - Kröger Nutzfahrzeuge [EN]

Technical data

Load capacity
Permissible total weight:	24,000 kg
Empty weight*:	approx. 4,850 kg
Payload:	approx. 19,150 kg

Dimensions
Total vehicle length*:	approx. 11,670 mm
Total vehicle width:	approx. 2,460 mm
Load length*:	approx. 9,800 mm
Platform height*:	approx. 1,300 mm

* = depending on equipment.

Basic version

The basic version of the PWO24 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to notelist

Tyres	6 x 385/65 R22.5 factory refurbished tyres on centre well rims 80 km/h permitted
Axles	ADR tapered roller bearing axle, 3 x 11.3 tonnes axle load (105 km/h), 2050 mm track width without ABS up to 60 km/h, wheel brake 406 x 120 mm, 130 mm square axle
Springs	2-layer parabolic spring suspension, 100 mm wide, approved for up to 105 km/h, overload protection on all 6 springs, rocker arms between the 2nd and 3rd axle
Steering	Turntable steering with ball bearing turntable and type-tested triangular drawbar 1,990 mm, Height adjustable as well as drawbar relief
Brake system	dual line service brake system with automatic load-dependent brake force control (ALB), 2x, 6 x diaphragm brake cylinder, spindle parking brake for the rear axle
Chassis frame	welded steel construction; double T main load bearer
Plateau	4 mm steel floor, lashing points on the outer frame profile every 500 mm
Electrical system:	12 volt system according to the guidelines of the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, 3 function lights (rubber mounted), number plate lights, position lights
Accessories	stable underride protection, number plate bracket, wheel chocks with bracket, plastic mudguard at the rear, park sockets for all connections on the drawbar
Paintwork	vehicle blasted with steel grit and also degreased, chip-resistant primer, sealing of areas in particular risk of corrosion using bodywork sealing compound, top coat in German quality two-component gloss paint Colouring: Kröger green

Additional equipment

To prepare the PWO24 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

	SUPERSTRUCTURE
	A 100P1	Fixed, anodised aluminium front wall, 800 mm high
	A 116P1	Loading area extension to 10,000 mm instead of 9,850 mm through 150 mm bolted spacer plate (only possible in combination with F 300P1)
	A 170P1	Foldable frame board walls on the sides and rear approx. 600 mm high (box transport), incl. foldable and removable posts (only in combination with A 100P1)
	A 171P1	Foldable frame board walls on the sides and rear approx. 800 mm high (box transport), incl. foldable and removable posts (only in combination with A 100P)
	A 250P1	Anodised aluminium board walls 600 mm high, 3 x sides, 1 x rear, foldable and removable, including foldable and removable posts (only in combination with A 100P1)
	A 251P1	Anodised aluminium board walls 800 mm high, 3 x sides, 1 x rear, foldable and removable, including foldable and removable posts (only in combination with A 100P)
	A 266P1	Both sides 1 x additional tensioning strap between the bale supports at a height of 1000 mm (only in conjunction with A550P1)
	A 268P1	Lateral support edge (steel), screw-on version on left + right, edge dimensions approx. 70mm W x 60 mm H, interior width approx 2330 mm, installed on the outer frame profile in the row of holes for lashing points incl. mounting options for lashing strap for transporting standing round bales
	A 269P1	Lateral support edge (galvanized steel), screw-on version on left + right, edge dimensions approx. 30 mm W x 35 mm H, interior width approx 2410 mm, installed on the outer frame profile in the row of holes for lashing points incl. mounting options for lashing strap for transporting standing square bales
	A 270P1	Mobile aluminium stepladder clamped onto the chassis
	A 350P1	Hydraulically lowerable square tube (galvanised) on both sides over the whole length for load securing, front and rear board walls designed as grid frames approx. 1000 mm high (box transport)
	A 361P1	Hydraulic bale transport securing system on both sides over the whole length, front and rear board walls designed as fixed bale grids approx. 2,200 mm high, partitioned horizontally (not in conjunction with A115P1)
	A 365P1	Hydraulic bale transport securing system on both sides over the whole length, front and rear board walls designed as fixed bale grids approx. 2200 mm high, additional safety grid on the side between the bale protection
	A 370P1	Screw-on bale grille elevation 300 mm on the front and rear (only in conjunction with A 361P1 or A 365P1)
	A 550P1	Bale supports front and rear have adjustable tilt, rear bale support with 1,100 mm extension, folding and locking swivel rungs with tensioning straps for securing the load from the side (not in conjunction with A 115P1, A170P1, A250P1, A361P1)
	A 555P1	Stroke support for swivel rungs (only in conjunction with equipment A 550P1)
	A 650P1	Catwalk with accident protection bar on the front wall (in accordance with German accident prevention regulations UVV) incl. mounting step on the drawbar (only possible in conjunction with A100P1 equipment)
	CHASSIS
	F 130P1	Towing device at the rear
	F 180P1	Plastic mudguards for the front axle (quarter circle)
	F 196P1	Spray protection in the plastic mudguard (mandatory for approval > 60 km/h)
	F 270P1	Side collision protection (not necessary behind an agricultural or forestry tractor)
	F 280P1	Bracket for spare wheel with jack on the vehicle (not possible in conjunction with A 270P1)
	F 285P1	Drawbar support for drawbar type Klemmfix
	F 290P1	Plastic toolbox, dimensions: W 600 mm x D 500 mm x H 400 mm
	F 300P1	Length-adjustable Y-drawbar (adjustment range 1,500-2,100 mm)
	F 305P1	Reinforced Y-drawbar (26 tonnes), 1900 mm long
	F 400P1	A.B.S. 24 volt
	F 460P1	Automatic parking brake (spring-type cylinder)
	F 465P1	Separate release valve for front axle
	F 468P1	Brake system with Duomatik couplings
	F 510P1	Side marking lights (LED)
	F 516P1	Position and number plate lights as LED version
	F 517P1	Warning sign package incl. lighting on the bale grid installed on the rear on top (only with A 550P1)
	F 518P1	3 function rear lights, angular, LED version
	F 520P1	5 function rear lights with fog light and reversing light (24 volt connection 7-pin required)
	F 521P1	2 x LED reversing lights on the rear of the vehicle (12 volt 3-pin socket required)
	F 523P1	2 x LED lateral reversing lights on the chassis (12 volt 3-pin socket required)
	F 526P1	Protective grids for the rear lights, screw-on version (not permitted on German public roads)
	F 527P1	Separate switching box with 3x toggle switches (on+off) consisting of 1x main switch and 2x for electrical functions (power supply via 3-pin socket, 12 volt)
	F 529P1	Hydraulic hose marking "Kennfixx" (price per hydraulic pipe)
	F 632P1	12.9 tonnes ADR axles (105 km/h), reinforced, 2050 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm, 150 mm square axle
	F 645P1	9 tonnes GIGANT axles (105 km/h), 2,040 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm (approved only for tyres up to 445/65 R22.5)
	F 655P1	9 tonnes GIGANT axles (105 km/h), 2,040 mm track, ABS prepared, automatic slack adjuster, wheel brake 420 x 180 mm (approved only for tyres up to 445/65 R22.5)
	F 673P1	Rear axle forced-steered, 9 tonnes ADR forced-steering axle (max. 60 km/h), 2050 mm track, wheel brake 406 x 120 mm, 130 mm, square axle (Ackerman steering)
	F 915P1	Rubber buffer mounted on the rear axle
	F 916P1	Plastic wall-protective profile below the side board walls (in conjunction with foldable side board walls)
	WHEELS
	R 200P1	Tyres, "new" 385/65R22.5 (105 km/h) manufacturer PIRELLI Triathlon (EU Tyre Label B,A,70)
	R 220P1	Tyres, "new" 425/65 R22.5 (105 km/h), (platform height approx. + 40 mm)
	R 239P1	Tyres, "new" 455/40 R22.5 (100 km/h), 160 J TL ADVANCE GL251 Plus EU (Tyre Label C,C,72), (catwalk height approx. - 70 mm)
	R 240P1	Tyres, "new" 445/65R22.5 (105 km/h) (platform height approx. + 50 mm)
	R 243P1	Tyres, "new" 500/60 R22.5 NOKIAN Country King (40 km/h), catwalk height approx. + 100 mm), rims with imprint depth ID + 30 mm, i.e. track gets narrower
	R 245P1	Tyres, "new" 560/45 R22.5 BKT FLOTATION RADIAL, profile FL 693 M, (70 km/h), rims with imprint depth ID + 30 mm, i.e. track gets narrower
	R 246P1	Tyres, "new" 560/60 R22.5 BKT FLOTATION RADIAL, profile FL 693 M, (70 km/h), (catwalk height approx. + 100 mm), rims with imprint depth ID + 30 mm, i.e. track gets narrower
	R 259P1	Tyres "new" 560/60R22.5 NOKIAN Country King (65 km/h) 161D with reinforced rims 20.00 (tyre load at 1.5 bar 10 km/h = 5,000 kg) (catwalk height approx. + 100 mm)
	PAINTWORK
	L 145P1	Special paintwork, chassis and superstructure according to RAL tone
	L 150P1	Stone chipping protection coating under the superstructure in the area above the wheels
	EXPERTS REPORT/HANDING OVER
	T 150P1	Expert's report for 40 km/h registration
	T 200P1	Expert's report for 60 km/h registration
	T 300P1	Expert's report for 105 km/h registration (only in conjunction with F400P1, F510P1, F520P1, F655P1, R 200P1 or R 220P1, or R 240P1 / total external width may not exceed 2550 mm)
	T 420P1	Dekra load-securing certificate
	T 900P1	Transport costs, German post code 0-4
	T 901P1	Transport costs, low-bed transport, German post code 0-4 (when ordering configuration A 361P1)
	T 910P1	Transport costs, German post code 5-9
	T 911P1	Transport costs, low-bed transport, German post code 5-9 (when ordering configuration A 361P1)