TAW20

Due to the horizontal pusher system, the highest possible operational security is guaranteed. So that the load can be pushed off with the lowest possible friction values, the agroliner pusher trailer has a stainless steel base as standard and the pusher plate is coated with VA sheet steel plates. The side panels are designed to be torsion-resistant so that the seal, particularly with bulk cargo such as rapeseed and grain, is guaranteed to be long-lasting. The standard large volume tailgate effectively increases the loading volume.

Technical data
Load capacity  
Permissible total weight: 20,000 - 24,000 kg
Empty weight*: approx. 7,380 kg
Payload*: approx. 12,620 - 14,620 kg
Drawbar load*: 2,000 kg (optionally 3,000 or 4,000 kg are also possible)
Load volume*: approx. 35 - 40 m³
Dimensions  
Platform height: approx. 1,450 mm
Internal cargo area dimensions*: approx. 5,200 - 7,500 mm L x 2,260 mm W x 1,480 - 2,450 mm H
Technical details  
Oil requirement*: approx. 26 litres

* = depending on equipment.

Basic version

The basic version of the TAW20 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to notelist

Tyres 4 x 550/60-22.5 16PR on centre well rims 40 km/h, profile 328
Axles ADR tapered roller bearing axle, 2 x 11.3 tonnes axle load (60 km/h), 2050 mm track width approved up to 60 km/h without ABS (technically 105 km/h), wheel brake 406 x 120 mm, 130 mm square axle
Springs 24 tonnes parabolically suspended linked steering unit with trailing links and dynamic axle compensation, 100 mm wide, approved up to 105 km/h, 1525 mm axle wheelbase
Draw gear rigid drawbar with 40 mm flanged towing eye DIN11026 screwed on (coupling required on the tractor, DIN 11029), mechanical saddle landing gear with rapid speed
Chassis frame welded construction, main load bearer made from weight-optimised I beams
Brake system dual line service brake system with automatic load-dependent brake force control (ALB), 4 x diaphragm brake cylinders, spindle parking brake acting on one axle
Hydraulic system the tractor must be equipped with two double-acting controllers: 1 x connection for the sliding device (advance and retract) and 1 x hydraulic tailgate
Pusher plate rail-guided push plate with three double-acting hydraulic cylinders, cover plate from 2.5 mm stainless steel with sturdy replaceable PU seals, viewing window in the pusher plate approx. 800 x 480 mm, mechanically foldable bulkhead, carried out as grille
Cargo area two-piece floor assembly (movable element at the front, fixed element at the rear), cover plate consisting of 2.5 mm stainless steel, floor plate chassis 3 mm stainless steel with profile plate substructure 3 mm, 3 mm side panels made from high-tensile fine grain sheet steel plate in welded ribbed construction, the floor assembly is screwed on, hydraulic large area tailgate with surrounding replaceable rubber seal, hydraulic 4-fold locking mechanism, prepared for grain sliders
Electrical system: 12 volt system according to the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, 3 function lights, number plate lights
Accessories stable foldable underride protection made from round tube, 2 x wheel chocks with bracket, plastic mudguard at the rear, hose cabinet for all supply lines on the drawbar
Paintwork Vehicle sprayed, dressed, degreased and additionally phosphated, cathodic dip painted (CDP), top coat of the chassis and tailgate using powder coating, top coat side board wall in German quality two-component gloss paint Assembly: Kröger - green (thrust cylinder, bulkhead frame, swivel arm RAL 9006) Chassis: Kröger - red
Additional equipment

To prepare the TAW20 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

SUPERSTRUCTURE
A 114B Superstructure length approx. 8100 mm instead of 7100 mm (only in combination with hydraulic spring suspension)
A 171B fixed side sidewall extensions (galvanized steel), consisting of a 100 mm x 80 mm profile tube, for steel side board walls up to approx. 1000 mm before the end of the superstructure
A 180B Pluggable side sidewall extensions (aluminium) 300 mm for side board walls up to approx. 1000 mm before the end of the superstructure (increases the loading volume by approx. 4 m³)
A 185B Hydraulically lifted mulching flap 500 mm high (instead of the mechanical version)
A 190B Pluggable sidewall extension (aluminium) 300 mm for large area tailgate
A 192B Pluggable sidewall extension (aluminium) 100 mm for large area tailgate
A 270B Mobile aluminium stepladder with brackets
A 280B Additional viewing window with guard screen in the bulkhead
A 543B Top mechanically foldable side board walls 500 mm (one-side only, right or left side) for reducing the overhead loading height, mechanical locking
A 563B Spreader unit with two integrated standing rollers, underlying thrower plates and swinging throwing arms incl. hydr congestion warning sign (double-acting control unit required), hydr. tailgate, hydraulic lines for congestion warning sign, mechanically driven via PTO shaft incl. overload protection (only in combination with F 949B)
A 570B Grain feed without chute in the middle in the rear board wall (480 x 290 mm)
A 650B Catwalk with accident protection bar on the bulkhead including aluminium stepladder
A 700B Yellow tarpaulin with aluminium roller pipe, plug-in triangles and fastening material (only in combination with A 650B) (not compatible with sidewall extensions)
A 752B 2-wing hydraulic cargo area cover system driven by oil motors, covered with a net (e.g. for manure / silage / double-acting control unit and 3-pin 12-V socket required / not compatible with extension A 180B & A 190B and foldable side panel, only in combination with A 171B)
A 790B Galvanised protective cover for rotary actuator of the automatic cargo area cover
CHASSIS
F 055B 6/2-directional valve for two double-acting functions; switching point on a double-acting control unit
F 130B Towing device at the rear
F 170B Hydraulically pivoted EU type-tested underride protection on the rear, integrated in the hydr. tailgate's sequence control
F 180B Plastic mudguard, front axle (required for warning panel packet)
F 200B Tarpaulin cover at the rear over the entire width of the vehicle from the underride protection to below the loading surface edge
F 322B Reinforced height-adjustable, rubber bearing drawbar, dimensioned for 4 tonnes drawbar load (mandatory from 4 tonnes drawbar load), version as central tube
F 325B Hydraulically spring suspended towing device instead of fixed towing device (only in combination with hydraulic jack)
F 328B Hydraulic jack instead of the mechanical landing gear (double-acting control unit required)
F 329B Double hydraulic jack instead of the mechanical landing gear (double-acting controller required)
F 332B SCHARMÜLLER parallel shank drawbar head Type K80 up to 4 tonnes drawbar load
F 510B Side marking lights (LED)
F 514B Contour marking film, yellow on the side and rear of the vehicle (mandatory for approval > 60 km/h)
F 516B Position and number plate lights as LED version
F 517B Warning sign package for wide loads (required from a width of 2,750 mm, only in conjunction with F 1801B)
F 518B 3 function rear lights, angular, LED version mounted on the tailgate
F 521B 2 x LED reversing lights on the rear of the vehicle (12 volt 3-pin socket required)
F 522B LED working floodlight on front wall for cargo area illumination (3-pin socket required)
F 523B 2 x LED lateral reversing lights on the chassis (12 volt 3-pin socket required)
F 527B Separate switching box with 3x toggle switches (on+off) consisting of 1x main switch and 2x for electrical functions (power supply via 3-pin socket, 12 volt)
F 529B Hydraulic hose marking "Kennfixx" (price per hydraulic pipe)
F 601B Axle wheelbase > 1800 mm for 24 tonnes total weight (only in combination with reinforced axles)
F 613B Hydraulic spring system including BPW axles (max. 60 km/h), track 2150 mm; second axle trailing steered, 11 tonnes axle load (at 60 km/h); wheel brake 410 x 180 mm; 150 mm square axle (brake cylinder mounted at top, no lifting axle possible)
F 621B Hydraulic spring system including BPW axles (max. 60 km/h), track 2150 mm; second axle forced steering, 11 tonnes axle load (at 60 km/h); wheel brake 410 x 180 mm; 150 mm square axle (brake cylinder mounted at top)
F 627B Parabolically suspended linked steering unit with trailing links and dynamic axle compensation (32 tonnes)
F 630B 12 tonnes BPW axles (max.60 km/h), reinforced, 2150 mm track, without ABS and automatic slack adjuster, Type GS12010, wheel brake 410 x 180 mm, 150 mm square axle (only in combination with F 627B)
F 632B 13.1 tonnes ADR axles (60 km/h), reinforced, 2150 mm track, without ABS and automatic slack adjuster, (technical 105 km/h) wheel brake 420 x 180 mm, 150 mm square axle
F 674B 11 tonnes BPW self-steering axle (max. 60 km/h), without ABS + automatic slack adjuster, 2150 mm track, wheel brake 410 x 180 mm, 150 mm square axle (only in combination with F 627B and F 630B)
F 676B 11 tonnes BPW forced-steering axle (max. 60 km/h), reinforced, without ABS + automatic slack adjuster, 2,150 mm track, type GSL12010, wheel brake 410 x 180 mm, 150 mm square axle (in combination with F 627B and F 630B)
F 677B 11 tonnes ADR self-steering axle (max. 60 km/h), without ABS + automatic slack adjuster, 2150 mm track, wheel brake 420 x 180 mm, 150 mm square axle (only in combination with F 632B)
F 678B 11 tonnes ADR forced-steering axle (max. 60 km/h), without ABS + automatic slack adjuster, 2150 mm track, wheel brake 420 x 180 mm, 150 mm square axle (in combination with F 632B)
F 720B 1st axle carried out as lifting axle (only possible in combination with hydraulic spring suspension)
F 900B Feed control for the pusher plate per speed monitoring for spreader unit (only in combination with A 563B & F 527B)
F 902B Electronic load control with signal lamp on the vehicle (only possible in combination with hydraulic suspension, 12 volt 3-pin socket required)
F 903B Signal lamp for the correct locking of the hydraulic tailgate (12 V, 3-pin socket required)
F 930B Tie rod, forced steering, with additional automatic telescope
F 949B PTO through drive to drive a spreader unit, split main shaft with intermediate bearing and protective pipe, designed for up to 80 KW at 1,000 rpm (only in combination with F325B)
WHEELS
R 263B Tyres "new" 650/55 R26.5 BKT FLOTATION RADIAL, profile FL 630, (65 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5,185 kg)
R 264B Tyres "new" 620/60R26.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,310 kg)
R 281B Tyres "new" 650/55 R26.5 BKT FLOTATION RADIAL, profile FL 693, (70 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5,185 kg)
R 288B Tyres, "new" 710/50 R26.5 BKT FLOTATION RADIAL, profile FL 693, (70 km/h) 170D, (tyre load at 1.5 bar 10 km/h = 5305 kg)
R 292B Tyres "new" 710/50 R26.5 BKT FLOTATION RADIAL ULTRA, profile FL 630, (65 km/h) 170D, (tyre load at 1.5 bar 10 km/h = 5305 kg)
R 293B Tyres "new" 710/50R26.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,615 kg)
PAINTWORK
L 100B Special paintwork, chassis according to RAL tone
L 130B Special paintwork, superstructure, according to RAL tone
L 140B Special paintwork for thrust cylinder, bulkhead frame, swivel arm according to RAL tone
EXPERTS REPORT/HANDING OVER
T 150B Expert's report for 40 km/h registration
T 200B Expert's report for 60 km/h registration (max. 2 tonnes drawbar load permitted)
T 900B Transport costs, German post code 0-4
T 910B Transport costs, German post code 5-9
Downloads

Notelist

Would you like to find out more?

There is also a contact person for your region:

Matthias Oelkers
Sales - external
(north - centre - east DE; DK)
+49 173 / 6484847
Markus Borchers
Sales - external
(central - west DE; LU)
+49 177 / 7963617
Peter Franz
Sales - external
(south - central DE, AT)
+49 171 / 9572155
Symen van der Veen
Sales - external
(BE; NL; LU)
+31 6515 72523
Sándor Fazekas
Sales - external
(BG; CZ; HR; HU; RO; RS; SK; SL)
+49 176 / 66456951
Julian Franke
Sales - internal / shipping

+49 4445 / 96 36 - 39
Oliver Krohse
Sales manager

+49 4445 / 96 36 - 24

©2022. Peter Kröger GmbH