THL 30 - Kröger Nutzfahrzeuge [EN]

With our hook-lift trailer program we rely exclusively on the proven hook-lift systems from "MEILLER". Alongside out proven chassis technology, we offer you the perfect system solution. Premium quality through and through.

Technical data

Load capacity
Permissible total weight:	31,000 - 34,000 kg
Empty weight*:	approx. 7,500 - 10,000 kg
Tipping/lifting capacity:	30,000 kg (incl. the container's own weight)
Drawbar load*:	4,000 kg up to 40 km/h (2,000 kg over 40 km/h)

Dimensions
Container lengths:	6,250** – 7,500 mm
Rollers height:	approx. 1,300 mm

Technical details
Tipping angle:	max. 49°

* = depending on equipment
** = can only be tipped in certain cases due to the short container overhang

Basic version

The basic version of the THL30 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to notelist

Tyres	6 x 425/65 R22.5 "NEW" on centre well rims approved for 100 km/h
Axles	ADR axles 3 x 12 tonnes (60 km/h), 2150 mm track width (technical 105 km/h), automatic slack adjuster, wheel brake 420 x 180mm, square axle 150mm
Springs	36 tonnes parabolically suspended linked steering unit with dynamic brake compensation, 1550 mm axle wheelbase
Steering	3rd axle carried out as self-steering axle, hydraulic lock
Draw gear	rigid towing device with Scharmüller parallel shank drawbar head type K80, 4 tonnes drawbar load up to 40 km/h (2 tonnes when more than 40 km/h), mechanical saddle landing gear with rapid speed
Chassis frame	integrated frame construction, welded construction, main load bearer made from torsion-resistant square tube profiles
Brake system	dual line service brake system with automatic load-dependent brake force control (ALB), 6 x diaphragm brake cylinders, automatic parking brake (spring-loaded cylinder)
Hydraulic system	The tractor must be equipped with one single-acting controller: controller for locking the self-steering axle, on-board hydraulics, "MEILLER“ with multi-piston axial pump 115 litres / minute at 1000 rotations per minute (up to 300 bar) and 62 litre hydraulic tank as well as PTO-shaft drive, PTO shaft and wireless remote control "ISAR-Control"; the following double-acting functions are controlled by the on-board hydraulics: 1 x picking-up / tipping, 1 x connection for forward and return strokes, 1 x hydraulic internal locking, load-dependent rapid speed switching when putting down with proportional operation of the arm
Hook lift	factory new hook lift system brand "MEILLER" Type RK30.70L with hydraulic internal locking mechanism hook height 1570 mm according to DIN 30722-1 (main container load bearer 180 mm)
Electrical system:	12 volt system according to the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side marker lamps, 3 function lights (rubber mounted), number plate lights, position lights
Accessories	stable foldable underride protection made from round tube, 2 x wheel chocks with bracket, plastic mudguards quarter circle (up to 40 km/h), warning sign package front and rear, Hose coat rack for all supply lines on the draw tube
Paintwork	vehicle blasted with steel grit and also degreased, chip-resistant primer, top coat in German quality dual-component gloss paint Hook: RAL 7021 black grey Chassis: RAL 7021 black grey

Additional equipment

To prepare the THL30 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

	CHASSIS
	F 0488	Additional double-acting function on the control block of the on-board hydraulics
	F 0558	6/2-directional valve for two double-acting functions; switching point on a double-acting control unit
	F 1308	Towing device at the rear
	F 1618	Mechanically extendable underride protection (required for container lengths longer than 7000 mm)
	F 1858	One-piece aluminium mudguard (these mudguards are mandatory for low-pressure tyres)
	F 2708	Side collision protection (mandatory for registration > 40 km/h)
	F 2908	Toolbox plastic Dimensions: 620 W x 610 D x 320 H
	F 2918	Mains cabinet made of perforated stainless steel sheet metal dimensions 610 mm W x 120 mm D x 1000 mm L
	F 3228	Reinforced height-adjustable, rubber bearing drawbar, dimensioned for 4 tonnes drawbar load (mandatory from 4 tonnes drawbar load), version as central tube
	F 3258	Hydraulically height-adjustable drawbar damped via nitrogen accumulator (only in conjunction with hydraulic support foot)
	F 3268	Pulling cylinder between the draw gear + tractor for an improved weight distribution
	F 3298	Double hydraulic jack instead of the mechanical landing gear (required for forced steering)
	F 4688	Brake system with Duomatik couplings
	F 5168	Position and number plate lights as LED version
	F 5188	3 function rear lights, angular, LED version
	F 5218	2 x LED reversing lights on the rear of the vehicle (12 volt 3-pin socket required)
	F 5238	2 x LED lateral reversing lights on the chassis (12 volt 3-pin socket required)
	F 5268	Protective grids for the rear lights, screw-on version (not permitted on German public roads)
	F 5288	Operate one electrical function via the on-board hydraulics' remote control
	F 5298	Hydraulic hose marking "Kennfixx" (price per hydraulic pipe)
	F 5318	3/2 directional valve in front of hydraulic control block as a switching point between the control block and pressure and return lines (required when operating pumps/consultation required)
	F 5408	Separate oil stub line to the rear (diameter 15 mm)
	F 6218	BPW Tridem axle unit 3 x 11to (max. 60 km/h), hydraulic suspension, including forced steering for 1st and 3rd axle, 2150mm track, AGS, wheel brake 410 x 180mm, axle square 150mm; (only in conjunction with equipment F 3298 & F 8018, brake cylinder on top)
	F 7208	1st axle carried out as lifting axle (only possible in combination with hydraulic spring suspension)
	F 8018	Electrically switched rear-axle support for hydraulic spring suspension (increased stability)
	F 9028	Electronic load control with signal lamp on the vehicle (only possible in combination with hydraulic suspension, 12 volt 3-pin socket required)
	F 9038	Signal lamp for the correct closing of the hydraulic container lock
	F 9068	Protective cover for container internal lock made from aluminium checkered plate
	F 9278	Central lubrication system with 12 volt electric pump for Kröger THL30 (hydraulic suspension & forced steering), 1.9 kg grease storage tank; adjustable pump element with overpressure valve for checking the lubricating points - lubricating interval adjustable via a time switch; progressive distributor; designed for up to 56 lubricating points (12 volt 3-pin socket required)
	F 9308	Tie rods, forced steering (2 x) with additional automatic telescope
	F 9548	Wide-angle universal shaft instead of the standard universal shaft
	Info:	For forced-steering axles, 2 x cranked push rods for mounting balls K50 is supplied as standard.
	WHEELS
	R 2598	Tyres "new" 560/60R22.5 NOKIAN Country King (65 km/h) 161D with reinforced rims 20.00 (tyre load at 1.5 bar 10 km/h = 5,000 kg)
	R 2648	Tyres "new" 620/60R26.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,310 kg)
	R 2678	Tyres "new" 600/55R26.5 NOKIAN CT BAS (65 km/h) 173D, (tyre load at 1.5 bar 10 km/h = 5000 kg), (reinforced construction site tyres, not suitable for soft ground)
	R 2778	Tyres, "new" 650/55R26.5 ALLIANCE FLOTATION RADIAL profile I 390 (70 km/h) 178D, HEAVY DUTY (tyre load at 1.5 bar 10 km/h = 6700 kg, reinforced construction site tyres)
	R 2808	Tyres "new" 650/55R26.5 NOKIAN CT BAS (65 km/h) 177D, (tyre load at 1.5 bar 10 km/h = 5220 kg, reinforced construction site tyres, not suitable for soft ground)
	R 2818	Tyres "new" 650/55R26.5 BKT FLOTATION RADIAL, profile FL 693, (65 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5,185 kg)
	R 2888	Tyres, "new" 710/50R26.5 BKT FLOTATION RADIAL, profile FL 693, (70 km/h) 170D, (tyre load at 1.5 bar 10 km/h = 5305 kg)
	R 2938	Tyres "new" 710/50R26.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,615 kg)
	Info:	At a total external width of 2750 mm or greater, equipment F 5178 warning sign package must be selected!
	PAINTWORK
	L 1408	Special paintwork, chassis and hook unit according to RAL tone
	EXPERTS REPORT/HANDING OVER
	T 1518	40 km/h approval according to EU type approval, delivery with COC papers (net price not discountable)
	T 2018	60 km/h approval according to EU type approval, delivery with COC papers (net price not discountable, only in conjunction with F 2706)
	T 5008	Technical briefing on site (net price not discountable)
	T 9008	Transport costs, German post code 0-4 (net price cannot be discounted)
	T 9108	Transport costs, German post code 5-9 (net price cannot be discounted)