|
SUPERSTRUCTURE |
|
A 4536 |
21 tonnes hook system, NEW brand "MEILLER" type RS21.70 for container lengths from 4,750 to 7,000 mm (max tilt angle 47°) including load-dependent speed valve for optimising the speed of the hook (only effective in empty or partial-load range when picking up/tilting), instead of RS21.65 (only with F 0496) |
 |
|
A 4976 |
MEILLER double rapid-traverse system, consisting of speed traverse (default), rapid speed and end position damping system (only in conjunction with F 0496) |
|
|
CHASSIS |
|
F 0486 |
Additional double-acting function on the control block of the on-board hydraulics (max. 10L extractable oil quantity) (not designed for continuous operation) |
|
|
F 0496 |
On-board hydraulics, "MEILLER" NEW with pump, 115 litre at 1000 rpm (up to 320 bar), 38 litre hydraulic tank as well as PTO-shaft drive, PTO-shaft + wireless remote control for the tractor "ISAR-Control"; hydraulic control block for three double-acting functions |
 |
|
F 0526 |
Auxiliary cylinder for increasing the tipping capacity, integrated into the hook hydraulic circuit |
 |
|
F 0556 |
6/2-directional valve for two double-acting functions; switching point on a double-acting control unit |
|
|
F 1006 |
Automatic trailer coupling including light, pneumatic and hydraulic connections for a 2nd trailer |
 |
|
F 1306 |
Towing device at the rear |
 |
|
F 1616 |
Mechanically extendable underride protection (required for container lengths longer than 6000 mm) |
 |
|
F 1856 |
One-piece aluminium mudguard for the front and rear axle instead of the plastic mudguard (these mudguards are mandatory for low-pressure tyres) |
|
|
F 2706 |
Side collision protection (required for outside of Germany and for HGV operation) |
 |
|
F 2906 |
Plastic toolbox, dimensions: W 600 mm x D 500 mm x H 400 mm |
 |
|
F 2916 |
Mains cabinet made of perforated stainless steel sheet metal dimensions 610 mm W x 120 mm D x 1000 mm L |
|
|
F 3226 |
Reinforced height-adjustable, rubber bearing drawbar, dimensioned for 4 tonnes drawbar load (mandatory from 4 tonnes drawbar load), version as central tube |
|
|
F 3256 |
Hydraulically suspended towing device instead of fixed towing device (double-acting control unit required) |
 |
|
F 3266 |
Pulling cylinder between the draw gear + tractor for an improved weight distribution |
|
|
F 3286 |
Hydraulic jack instead of the mechanical landing gear (double-acting control unit required) |
 |
|
F 3326 |
SCHARMÜLLER parallel shank drawbar head Type K80 up to 4 tonnes drawbar load |
 |
|
F 4606 |
Automatic parking brake (spring-type cylinder, required when ordering F 2906 & F 2916) |
|
|
F 4686 |
Brake system with Duomatik couplings |
|
|
F 5106 |
Side marking lights (LED) |
 |
|
F 5146 |
Contour marking film, yellow on the side and rear of the vehicle (mandatory for approval > 60 km/h) |
 |
|
F 5166 |
Position and number plate lights as LED version |
 |
|
F 5176 |
Warning sign package for wide loads (required from a width of 2750 mm) |
 |
|
F 5186 |
3 function rear lights, angular, LED version |
|
|
F 5216 |
2 x LED reversing lights on the rear of the vehicle (12 volt 3-pin socket required) |
 |
|
F 5236 |
2 x LED lateral reversing lights on the chassis (12 volt 3-pin socket required) |
 |
|
F 5266 |
Protective grids for the rear lights, screw-on version (not permitted on German public roads) |
 |
|
F 5286 |
Operate one electrical function via the on-board hydraulics' remote control (only in combination with F 0496) |
|
|
F 5296 |
Hydraulic hose marking "Kennfixx" (price per hydraulic pipe) |
 |
|
F 5316 |
3/2 directional valve in front of hydraulic control block as a switching point between the control block and pressure and return lines (supply hydraulic drives up to 200 bar / consultation required) |
|
|
F 5406 |
Separate oil stub line to the rear (diameter 15 mm) |
|
|
F 6016 |
Axle wheelbase > 1800 mm for 24 tonnes total weight (only in combination with adjustable axles and suspension) |
|
|
F 6136 |
Hydraulic spring system including BPW axles (max. 60 km/h), track 2150 mm; second axle trailing steered, 11 tonnes axle load (at 60 km/h); wheel brake 410 x 180 mm; 150 mm square axle (brake cylinder mounted at top, no lifting axle possible) |
|
|
F 6216 |
Hydraulic spring system including BPW axles (max. 60 km/h), track 2150 mm; second axle forced steering, 11 tonnes axle load (at 60 km/h); wheel brake 410 x 180 mm; 150 mm square axle (brake cylinder mounted at top) |
|
|
F 6266 |
Parabolically suspended linked steering unit with trailing links and dynamic axle compensation (24 tonnes) |
|
|
F 6276 |
Parabolically suspended linked steering unit with trailing links and dynamic axle compensation (32 tonnes) |
|
|
F 6306 |
12 tonnes BPW axles (max.60 km/h), reinforced, 2150 mm track, without ABS and automatic slack adjuster, wheel brake 410 x 180 mm, 150 mm square axle (only in combination with F 6276) |
|
|
F 6326 |
13.1 tonnes ADR axles (max. 60 km/h), reinforced, 2150 mm track, without ABS and automatic slack adjuster (technical 105 km/h) wheel brake 420 x 180 mm, 150 mm square axle (only in combination with F 6266 or F 6276) |
|
|
F 6456 |
9 tonnes GIGANT axles (105 km/h), 2,040 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm (approved only for tyres up to 445/65 R22.5) |
|
|
F 6746 |
11 tonnes BPW self-steering axle (max. 60 km/h), without ABS + automatic slack adjuster, 2150 mm track, wheel brake 410 x 180 mm, 150 mm square axle (only in combination with F 6276 and F 6306) |
|
|
F 6776 |
11 tonnes ADR self-steering axle (max. 60 km/h), without ABS + automatic slack adjuster, 2150 mm track, wheel brake 420 x 180 mm, 150 mm square axle (only in combination with F 6266 or F 6276 and F 6326) |
|
|
F 6786 |
11 tonnes ADR forced-steering axle (max. 60 km/h), without ABS + automatic slack adjuster, 2150 mm track, wheel brake 420 x 180 mm, 150 mm square axle (in combination with F 6266 or F 6276 and F 6326) |
|
|
F 7206 |
1st axle carried out as lifting axle (only in combination with F 6216, single-acting control unit required) |
|
|
F 8006 |
Hydraulic rear-axle support (increased stability / double-acting control unit required) |
 |
|
F 8016 |
Electrically switched rear-axle support for hydraulic spring suspension (increased stability) |
 |
|
F 9026 |
Electronic load control with signal lamp on the vehicle (only possible in combination with hydraulic spring suspension, 12 volt , 3-pin socket required) |
|
|
F 9036 |
Signal lamp for the correct closing of the hydraulic container lock |
 |
|
F 9066 |
Protective cover for container internal lock made from aluminium checkered plate |
 |
|
F 9306 |
Tie rod, forced steering, with additional automatic telescope |
|
|
F 9546 |
Wide-angle universal shaft instead of the standard universal shaft |
|
|
WHEELS |
|
R 2006 |
Tyres, "new" 385/65R22.5 (105 km/h) manufacturer PIRELLI Triathlon (EU Tyre Label B,A,70) |
|
|
R 2206 |
Tyres, "new" 425/65 R22.5 (105 km/h) (rolling height approx. + 50 mm) |
|
|
R 2406 |
Tyres, "new" 445/65 R22.5 (105 km/h) (rolling height approx. + 50 mm) |
|
|
R 2596 |
Tyres "new" 560/60 R22.5 NOKIAN Country King (65 km/h) 161D with reinforced rims 20.00 (tyre load at 1.5 bar 10 km/h = 5,000 kg) (rolling height approx. + 90 mm) |
|
|
R 2646 |
Tyres "new" 620/60R26.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,310 kg) |
|
|
R 2816 |
Tyres "new" 650/55 R26.5 BKT FLOTATION RADIAL, profile FL 693, (70 km/h) 169D, (tyre load at 1.5 bar 10 km/h = 5,185 kg) |
|
|
R 2886 |
Tyres, new 710/50R26.5 BKT FLOTATION RADIAL, profile FL 693, (70 km/h) 170D, (tyre load at 1.5 bar 10 km/h = 5305 kg) |
|
|
R 2936 |
Tyres "new" 710/50R26.5 NOKIAN Country King (tyre load at 1.5 bar 10 km/h = 5,615 kg) |
|
|
PAINTWORK |
|
L 1456 |
Special paintwork, chassis and hook unit according to RAL tone |
|
|
EXPERTS REPORT/HANDING OVER |
|
T 1506 |
Expert's report for 40 km/h registration |
|
|
T 2006 |
Expert's report for 60 km/h registration (max. 2 tonnes drawbar load permitted) |
|
|
T 5006 |
Technical instruction on-site |
|
|
T 9006 |
Transport costs, German post code 0-4 |
|
|
T 9106 |
Transport costs, German post code 5-9 |
|