TKD302-S

The TKD302-S with its hydraulically opening side panels is an all-rounder. With them, it can cope with unloading even poorly sliding cargo loads, like maize for silage or compost, for example. For lighter bulk cargo, the loading volume can be designed to be up to 29 m³ (in a combination with two trailers a huge 58 m³). These tippers also remain a fully-functional three-sided tipper.

The transmission of the drawbar load to the tractor unit has a positive effect on the stability and traction with central axle trailers (tandem). This also applies in a combination with a centre pivot trailer. Good handling when manoeuvring in solo mode and high stability when tipping also count among its particular strengths.

Technical data
Load capacity  
Permissible total weight: 20,000 - 24,000 kg
Empty weight*: approx. 4,700 - 5,700 kg
Payload*: approx. 14,300 - 19,300 kg
Drawbar load*: 2,000 - 4,000 kg
Load volume*: approx. 19.0 - 26.5 m³
Dimensions  
Platform height*: approx. 1,350 mm
Internal cargo area dimensions*: approx. 5,235 mm L x 2,420 mm W x 1,300 - 1,800 mm H
External cargo area dimensions*: approx. 5,300 mm L x 2,550 mm W x 1,300 - 1,800 mm
Technical details  
Tipping cylinder oil requirement*: approx. 23.4 litres

* = depending on equipment

Basic version

The basic version of the TKD302-S offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to notelist

Tyres 4 x 385/65 R22.5 factory refurbished tyres on centre well rims, approved for 80 km/h
Axles ADR tapered roller bearing axle, reinforced, 11.3 tonnes axle load (60 km/h), 2,050 mm track width approved up to 60 km/h without ABS (technically 105 km/h), wheel brake 406 x 120 mm, 130 mm square axle, 1480 mm axle wheelbase
Springs 21 tonnes 2 layer parabolic spring suspension, 100 mm wide, approved for up to 105 km/h, overload protection on all four springs, rocker arms between the front and rear axle
Draw gear rigid drawbar with 40 mm flanged towing eye DIN 11026 screwed on (coupling required on the tractor, DIN 11029), mechanical saddle landing gear with rapid speed
Chassis frame steel-welded construction, main load bearer made from torsion-resistant square tube profiles
Brake system dual line service brake system with automatic load-dependent brake force control (ALB), 4 x diaphragm brake cylinder, spindle parking brake for the rear axle
Tipping system 3-way tipper; hydraulic multi-piston press with cardanic suspension, 1 line system, ball tipper bearings with retainer at the rear, two unmistakable locking pins, hydraulic stroke limiter, securing cable
Tipper frame profile steel in welded construction, 4 mm steel floor plate
Bulkhead fixed, made from webbed combined multiplex board, 18 mm, WBP pasted, coated on outside only with green plastic PPL, integrated triangle for tarpaulin retrofitting, in the board wall area, use of stainless steel VA bolts, fixed corner rungs, ergonomic access ladder with catwalk, and accident protection bar according to the German accident prevention regulations (UVV), folded step outside and on the inside of the bulkhead
Side board walls right side: webbed combined multiplex board as with the bulkhead embedded in aluminium profile (with integrated water drain) with robust rubber seals that can be replaced, two side board walls each without horizontal partitioning, fixed centre posts with two removable connecting tubes, continuous central unlocking from underneath, unlocking lever from underneath at the front and rear with top dead point tensioner, optimally designed for the equipping of an automatic side board wall remote unlocking system
Side board walls left side: one-piece hydraulic special side board wall, double acting opening and closing, by means of airbag lifting device high above the cone of the material, thus also suitable for bulk cargo with poor sliding properties, side board wall material as with the bulkhead with rubber seal
Tailgate Basic design like side board walls on the right, integrated triangle for tarpaulin retrofitting, construction-type required approx. 1000 mm high (optionally approx. 1300 mm high, with body height 1800 mm), 1 grain feed in the middle (480 x 290 mm) with lever operation (left side) and removable discharge chute, fixed corner stanchions, central bottom unlocking, bottom unlocking lever on the left side with top dead point tensioner
Electrical system: 12 volt system according to the guidelines of the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector, yellow side reflectors, 3 function lights (rubber mounted), number plate lights, position lights
Accessories stable foldable underride protection made from round tube, 2 x wheel chocks with bracket, plastic mudguard at the rear, (if a 2nd trailer is to be towed, it must be fitted with a drawbar that has a minimum length of 2100 mm), park socket for all connections on the drawbar, safety caps on the screw connections, resting point supports for tipping bridge for reducing the noise during driving operation
Paintwork vehicle blasted with steel grit and also degreased, chip-resistant primer, sealing of areas in particular risk of corrosion using bodywork sealing compound, top coat in German quality dual-component gloss paint Superstructure: Kröger green, panels = "green" on outside, PPL plastic-coated, UV-resistant Chassis: Kröger red
Additional equipment

To prepare the TKD302-S in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

SUPERSTRUCTURE
A 050G1 LIGHT version, weight-optimised version Weight saving of up to 150 kg (depending on the equipment) floor plate 3 mm instead of 4 mm. No loss in stability by using high-tensile special steels
A 060G1 Board walls with plastic lightweight panels, 20 mm thick, side board wall height 1,500 mm, (colour white or in combination with L 120G1, not suitable for direct filling by woodchippers)
A 063G1 Board walls with plastic lightweight panels, 20 mm thick, side board wall height 1800 mm, (colour white or in combination with L 120G1), (not suitable for direct filling by woodchippers, delivery only possible without tyres)
A 070G1 one-piece hydraulic special side board wall on the right side (instead of on the left side) and swivel side panels (instead of on the right side)
A 182G1 Plug-in sidewall extension (steel) 300 mm high on the side comprising of hole pattern 20 x 20 mm (can only be used for roller tarpaulin)
A 264G1 5 x "pro" lashing eyes on both sides (when lowered, flush with body floor)
A 265G1 5 x "basic" lashing eyes on both sides (with stepped, open troughs in the body floor)
A 270G1 Mobile aluminium stepladder clamped onto the bulkhead
A 293G1 Operation of the bottom unlocking system for the rear side board walls on one side via separate top dead point tensioners at the bulkhead (then a total of 2 items)
A 300G1 Side tipping bridge extension 200 mm high, mounted on one side
A 310G1 Side tipping bridge extension 200 mm high, mounted on both sides
A 315G1 Side bottom unlocking hooks, with threaded bushings on both sides
A 320G1 Removable rear tipping bridge extension, over the whole vehicle width (W 2480 mm x L 350 mm)
A 400G1 Hydraulic side board wall remote unlocking system, mounted on one side, with connection for a 2nd vehicle
A 570G1 Additional slide gate with chute in the tailgate (total of 2 items right + left)
A 700G1 Yellow tarpaulin with aluminium roller board, hand crank and removable stop supports on the side (can be fastened on the side with 2 x strap ratchets)
A 710G1 Yellow tarpaulin (reinforced material) with aluminium roller board, hand crank and removable stop supports on the side (can be fastened on the side with 2 x strap ratchets)
A 800G1 Side board walls partitioned horizontally with rubber sealing system, on one side left or right only
A 820G1 Tailgate partitioned horizontally with rubber sealing system (only possible with body height 1800 mm)
CHASSIS
F 100G1 Automatic trailer coupling including light, pneumatic and hydraulic connections for a 2nd trailer
F 180G1 Plastic mudguards for the front axle
F 322G1 Reinforced height-adjustable, rubber bearing drawbar, dimensioned for 4 tonnes drawbar load (mandatory for 4 tonnes drawbar load), version as central tube
F 328G1 Hydraulic jack instead of the mechanical landing gear
F 332G1 SCHARMÜLLER parallel shank drawbar head Type K80 up to 4 tonnes drawbar load
F 334G1 SCHARMÜLLER round shaft drawbar eye Type D 40 mm Ø up to 2.5 tonnes drawbar load, DIN 11026
F 468G1 Brake system with Duomatik couplings
F 510G1 Side marking lights (LED)
F 514G1 Contour marking film, yellow on the side and rear of the vehicle (mandatory for approval > 60 km/h)
F 516G1 Position and number plate lights as LED version
F 518G1 3 function rear lights, angular, LED version, incl. indicator failure check
F 526G1 Protective grids for the rear lights, screw-on version
F 529G1 Hydraulic hose marking "Kennfixx" (price per hydraulic pipe)
F 530G1 Actuation of the 2nd trailer tipping mechanism with separate hydraulic connection and gate valve
F 531G1 3/2-directional valve for the tipping hydraulics (instead of standard gate valve)
F 540G1 Separate oil stub line to the rear (diameter 15 mm)
F 542G1 Assembly of a front screw conveyor (without screw only in combination with F 540G1)
F 626G1 Parabolically suspended linked steering unit with trailing links and dynamic axle compensation (24 tonnes)
F 632G1 13.1 tonnes ADR axles (60 km/h), reinforced, 2050 mm track, without ABS and automatic slack adjuster, (technical 105 km/h) wheel brake 420 x 180 mm, 150 mm square axle
F 645G1 9 tonnes GIGANT axles (105 km/h), 2,040 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm (approved only for tyres up to 445/65 R22.5)
F 672G1 9 tonnes ADR self-steering axle (max. 60 km/h), 2,050 mm track, wheel brake 406 x 120 mm, 130 mm square axle
F 677G1 11 tonnes ADR self-steering axle (max. 60 km/h), without ABS + automatic slack adjuster, 2,050 mm track, wheel brake 420 x 180 mm, 150 mm square axle (only possible in combination with F 632G1)
WHEELS
R 200G1 Tyres, "new" 385/65R22.5 (105 km/h) manufacturer PIRELLI Triathlon (EU Tyre Label B,A,70)
R 220G1 Tyres, "new" 425/65R22.5 (105 km/h) (platform height approx. + 50 mm)
R 240G1 Tyres, "new" 445/65R22.5 (105 km/h) (platform height approx. + 50 mm)
R 246G1 Tyres, "new" 560/60 R22.5 BKT FLOTATION RADIAL, profiles FL 693 M, (70 km/h), (tyre load at 1.5 bar 10 km/h = 4,010 kg) (catwalk height approx. + 220 mm), rims with imprint depth ID + 30 mm
R 259G1 Tyres "new" 560/60R22.5 NOKIAN Country King (65 km/h) 161D with reinforced rims 20.00 (tyre load at 1.5 bar 10 km/h = 5,000 kg) (catwalk height approx. + 220 mm)
PAINTWORK
L 100G1 Special paintwork, chassis according to RAL tone
L 120G1 Special paintwork, superstructure and side board walls according to RAL tone
L 150G1 Stone chipping protection coating under the tipping bridge in the area above the wheels
EXPERTS REPORT/HANDING OVER
T 150G1 Expert's report for 40 km/h registration
T 200G1 Expert's report for 60 km/h registration (max. 2 tonnes drawbar load permitted)
T 900G1 Transport costs, German post code 0-4
T 901G1 Transport costs, low-bed transport, German post code 0-4 (when ordering configuration A 063G1)
T 910G1 Transport costs, German post code 5-9
T 911G1 Transport costs, low-bed transport, German post code 5-9 (when ordering configuration A 063G1)
Downloads

Notelist

Would you like to find out more?

There is also a contact person for your region:

Matthias Oelkers
Sales - external
(north - centre - east DE; DK)
+49 173 / 6484847
Markus Borchers
Sales - external
(central - west DE; LU)
+49 177 / 7963617
Peter Franz
Sales - external
(south - central DE, AT)
+49 171 / 9572155
Symen van der Veen
Sales - external
(BE; NL; LU)
+31 6515 72523
Sándor Fazekas
Sales - external
(BG; CZ; HR; HU; RO; RS; SK; SL)
+49 176 / 66456951
Julian Franke
Sales - internal / shipping

+49 4445 / 96 36 - 39
Oliver Krohse
Sales manager

+49 4445 / 96 36 - 24

©2022. Peter Kröger GmbH