General



 

The agroliner three-axle three-sided tipper is designed for tractor and HGV use. This vehicle gives optimum transport performance, however, only with an HGV tractor unit which is also fitted with a tipper body. The maximum permitted total tractor weight of 40 tonnes cannot be achieved when pulled behind a tractor.

Technical data

Load capacity

Permissible total weight: 24,000kg
Empty weight: approx. 6,400kg (in the basic version)
Payload: approx. 17,600kg
Load volume: approx. 24.8 - 32.4m³ *

Dimensions

Platform height: approx. 1,420mm
Internal cargo area dimensions: approx. 7,880mm L x 2,420mm B x 1,300 - 1,700mm H *
External cargo area dimensions: approx. 7,950mm L x 2,550mm B x 1,300 - 1,700mm H *

Technical details

Tipping cylinder oil requirement: approx.  39.9 litres

*= depending on equipment

Basic version

The basic version of the HKD 402 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to your wish list Add to your wish list

Tyres 6 x 385/65 R22.5 factory refurbished tyres on centre well rims, approved for 80km/h
Axles tapered roller bearing axle, 3 x 9.0 tonnes axle load approved up to 105 km/h (without ABS, up to 60 km/h), 2040 mm track, wheel brake 420 x 180 mm, equipped with ABS and automatic boom adjuster (AGS)
Springs parabolically suspended linked steering unit with dynamic brake compensation on the double axle approved up to 105 km/h; overload protection for the rear parabolic spring suspension
Steering Turntable steering with ball rim and type-tested triangular drawbar, height adjustable as well as drawbar relief
Chassis frame steel welded construction, double T main load bearer, double T cranked to the front
Brake system dual line service brake system with automatic load-dependent brake force control (ALB), 6 x diaphragm brake cylinder, spindle parking brake for the rear axle
Tipping system 3-way tipper, hydraulic multi-piston press with cardanic suspension, 1 line system, ball tipper bearings with retainer at the rear, 2 unmistakable locking pins, hydraulic stroke limiter, safety rope
Tipper frame profile steel in welded construction, 4 mm steel floor plate
Bulkhead fixed made from webbed combined multiplex board 18mm, WBP pasted, in the area of the side panels the use of stainless steel VA bolts, fixed corner stanchions, steps on the drawbar, ergonomic access ladder with platform and accident protection bar according to the German accident prevention regulations (UVV), on the inside of the bulkhead
Side panels webbed combined multiplex board as with the bulkhead embedded in aluminium profile (with integrated water drain) with robust rubber seals that can be replaced, 3 side panels each without horizontal partitioning, fixed middle stanchions with 2 removable connecting tubes each, split, central bottom unlocking, bottom unlocking lever at the front and rear with top dead point tensioner, optimally designed for the equipping of an automatic side panel remote unlocking system
Tailgate basic design is the same as the side panels with an 1 grain hatch in the middle (480 x 290 mm) with lever operation (left side) and removable discharge chute, fixed corner stanchions, central bottom, bottom unlocking lever at the left with top dead point tensioner
Electrics 12 Volt system according to the guidelines of the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, three unit lamps (rubber mounted), number plate lights, position lights
Accessories stable underride protection according to EC Directives, number plate bracket, 2 x wheel chocks with bracket, protective caps on the screw connections, resting point supports for reducing the noise during driving operation, plastic mudguard on the front axle ans rear axle, park sockets for all connections on the drawbar
Paintwork vehicle blasted with steel grit and also degreased, chip-resistant primer, sealing of areas in particular risk of corrosion using bodywork sealing compound, Dual-component protection paint, top coat in German quality dual-component gloss paint. Superstructure: Kröger green, panels = covered with "green" film on both sides, not UV resistant; Chassis: Kröger red
Additional equipment

To prepare the HKD 402 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

  SUPERSTRUCTURE
Add to your wish list A 0504 LIGHT version, weight-optimised version Weight saving of up to 250 kg (depending on the equipment) Floor plate 3 mm instead of 4 mm. No loss in stability by using high-tensile special steels.
Add to your wish list A 0604 Side panels with plastic lightweight panels, 20 mm thick, side panel height 1500 mm, (colour white or in combination with L 1204, not suitable for direct filling by woodchippers),
Add to your wish list A 0624 Side panels with plastic lightweight panels, 20 mm thick, side panel height 1700 mm, (colour white or in combination with L 1204, not suitable for direct filling by woodchippers),
Add to your wish list A 1004 Side panel height 1500 mm instead of 1300 mm
Add to your wish list A 1274 Superstructure length 7000 mm instead of 7950 mm with 3 x side panels
Add to your wish list A 1284 Superstructure length 7500 mm instead of 7950 mm with 3 x side panels
Add to your wish list A 2610 "Shock-Stop" potato chute (conveyor belt rubber) in the front cargo area
Add to your wish list A 2654 6 x lashing eyes recessed in the body floor on both sides
Add to your wish list A 2700 Mobile aluminium stepladder clamped onto the bulkhead
Add to your wish list A 2800 Viewing window with guard grille in the bulkhead
Add to your wish list A 2934 Operation of the bottom unlocking system for the middle side panels on the left and right sides via separate top dead point tensioners mounted on the bulkhead (total of 4 items)
Add to your wish list A 3004 Side tipping bridge extension 200 mm high, can be mounted on both sides
Add to your wish list A 3104 Side tipping bridge extension 200 mm high, mounted on both sides
Add to your wish list A 3154 Side bottom unlocking hooks, with threaded bushings on both sides
Add to your wish list A 3200 Removable rear tipping bridge extension, over the whole vehicle width (W 2,480 mm x L 350 mm)
Add to your wish list A 4004 Hydraulic side panel remote unlocking system on one side, can be re-positioned on the right and left side as required
Add to your wish list A 4104 Hydraulic side panel remote unlocking system, can be mounted on both sides
Add to your wish list A 4154 Brackets for the hydraulic side panel remote unlocking system on both sides, without hydraulic lines and stamp
Add to your wish list A 5004 Pneumatic side panel remote unlocking system on one side, can be re-positioned on the right and left side as required
Add to your wish list A 5104 Pneumatic side panel remote unlocking system, mounted on both sides
Add to your wish list A 5700 Additional slide gate with chute in the tailgate (total of 2 items)
Add to your wish list A 5710 2 x additional slide gates with chute in the tailgate (total of 3 items)
Add to your wish list A 6004 Plug-in triangle at the front and rear (300 mm) + 2 x middle triangle with foldable roof arch
Add to your wish list A 7104 Yellow tarpaulin (reinforced material) with aluminium roller board, hand crank and removable stop supports on the side (can be fastened on the side with 3 x strap ratchets)
Add to your wish list A 8004 Side panels partitioned horizontally with rubber sealing system, on one side left or right only
Add to your wish list A 8104 Side panels partitioned horizontally with rubber sealing system, partitioned on both sides left or right
Add to your wish list A 8200 Tailgate partitioned horizontally with rubber sealing system
Add to your wish list A 8404 Middle stanchion partitioned on one side, right or left
Add to your wish list A 8454 Middle stanchion partitioned on both sides, right and left
Add to your wish list A 9054 Middle stancgion can be folded and removed completely, on one side left or right only
Add to your wish list A 9200 Tailgate as portal can be pivoted open by 270°
Add to your wish list A 9304 Side panels (3x) also as portal can be pivoted open to the outside from the middle, including adjustable eccentric bolts, per side
  CHASSIS
Add to your wish list F 1304 Towing device at the rear
Add to your wish list F 2800 Bracket for spare wheel with jack on the vehicle
Add to your wish list F 2854 Drawbar support for drawbar type Klemmfix
Add to your wish list F 2900 Plastic toolbox, dimensions: W 600 x D 500 x H 400
Add to your wish list F 3004 Length-adjustable Y-drawbar 27 tonnes (adjustment range 2,000-2,600 mm)
Add to your wish list F 3054 Reinforced Y-drawbar (26 tonnes), 2100 mm long
Add to your wish list F 4004 A.B.S. 24 Volt
Add to your wish list F 4104 E.B.S. Electronic brake system
Add to your wish list F 4604 Automatic parking brake (spring-type cylinder)
Add to your wish list F 4654 Separate release valve for front axle
Add to your wish list F 4684 Brake system with Duomatik couplings
Add to your wish list F 4850 Removeable voltage converter for light systems from 24 Volt to 12 Volt (not suitable for continuous operation)
Add to your wish list F 4954 Voltage converter for light systems from 12 Volt to 24 Volt permanently mounted on the chassis
Add to your wish list F 5004 24 Volt lighting system
Add to your wish list F 5010 Power supply for light system 15 pin instead of 2 x 7 pin
Add to your wish list F 5104 Side marking lights (LED)
Add to your wish list F 5144 Contour marking film, yellow on the side and rear of the vehicle (mandatory for approval > 60 km/h)
Add to your wish list F 5164 Position and number plate lights as LED version (24 Volt light system required)
Add to your wish list F 5200 5-unit rear lights with fog light and reversing light (second 7-pin 24 Volt connection required)
Add to your wish list F 5204 5-unit rear lights LED version with fog light and reversing light (second 7-pin 24 Volt connection required)
Add to your wish list F 5214 2 x LED reversing lights on the rear of the vehicle (12 Volt 3-pin socket required)
Add to your wish list F 5404 Separate oil stub line to the rear (diameter 15 mm)
Add to your wish list F 5424 Assembly of a front screw conveyor (without screw only in combination with F 5404)
Add to your wish list F 6334 9 tonnes BPW axles (105 km/h), Type ECO Plus 2, 2,040 mm track, ABS fitted, AGS, disc brakes TSB 4309 (ground clearance for off-road vehicles limited significantly, only in combination with F 4604)
Add to your wish list F 6354 9 tonnes BPW axles (105 km/h), Type ECO Plus 2, 2040 mm track, with ABS fitted, AGS, wheel brake 420 x 180 mm
Add to your wish list F 7004 Pneumatic suspension with quick lowering without lifting/lowering function (for approval of more than 60 km/h, only in combination with EBS)
Add to your wish list F 7104 Pneumatic suspension with quick lowering and lifting/lowering function (for approval of more than 60 km/h, only in combination with EBS)
Add to your wish list F 7204 2nd axle carried out as lift axle (only in combination with air bellows, controlled manually)
Add to your wish list F 9104 Hub odometer mileage indicator mounted on the rear axle for Gigant/SMB axles
  WHEELS
Add to your wish list R 2004 Tyres, "new" 385/65R22.5 (105 km/h) manufacturer Continental Hybrid HT3 (EU Tire Label B,B,73)
Add to your wish list R 2204 Tyres, "new" 425/65R22.5 (105 km/h) manufacturer Continental (platform height approx. + 50 mm)
Add to your wish list R 2404 Tyres, "new" 445/65R22.5 (105 km/h) manufacturer Continental (platform height approx. + 50 mm)
Add to your wish list R 2504 Tyres, "new" 550/60-22.5   16PR (40 km/h) (platform height approx. + 220 mm)
Add to your wish list R 2584 Tyres "new" 560/60R22.5 NOKIAN Country King 161D (tyre load at 1.5 bar 10 km/h = 5,000 kg) (platform height approx. + 220 mm)
Add to your wish list R 2604 Tyres, "new" 560/60R22.5 BKT FLOTATION RADIAL, profile FL 630, (65 km/h), (tyre load at 1.5 bar 10 km/h = 4,700 kg) (platform height approx. + 220 mm), rims with imprint depth + 30 mm
  PAINTWORK
Add to your wish list L 1004 Special paintwork, chassis according to RAL tone
Add to your wish list L 1204 Special paintwork, superstructure and side panels according to RAL tone
Add to your wish list L 1504 Stone chipping protection coating under the tipping bridge in the area above the wheels
  EXPERT'S REPORT/HANDING OVER
Add to your wish list T 1504 Expert's report for 40 km/h registration
Add to your wish list T 2004 Expert's report for 60 km/h registration
Add to your wish list T 3004 Expert's report for 105 km/h registration (only in combination with F 4004, F 5104, F 5144, F 5200 or 5204, R 2004)
Add to your wish list T 9004 Transport costs, German post code 0-4
Add to your wish list T 9104 Transport costs, German post code 5-9
Practical examples

Over recent years, we have adapted the HKD 402 to meet the customer's wishes for many tasks. One of our particular strengths: you only pay for what you really need!

Unloading potato harvest

Practical examples: Unloading potato harvest

Tipping with continuous swivel side wall

Practical examples: Tipping with continuous swivel side wall

Potato harvest

Practical examples: Potato harvest

Downloads
Download
Standard and ancillary equipment HKD402
2017-10_standard_and_ancillary_equipment_hkd402.pdf - 170 kB
Download
Product catalogue HGV solutions
kr_agroliner_folder_zka_1711_en_web.pdf - 2 MB